Back of your van!

[Vincey]

View attachment 8913 View attachment 8914
Must be in top three with my load. Had to drive for 2 hours without tuning left. Got to site without a problem.

You just done a ram raid at wack wholesale ?

 

[Danny]

View attachment 8913 View attachment 8914
Must be in top three with my load. Had to drive for 2 hours without tuning left. Got to site without a problem.

That is nuts... lol

 

[Danny]

Glad its not just my van is a s**t hole

How do you cope with that

Sent from my SM-N910F using Tapatalk

 

[brimplas1]

 

[scottie5]

I just boot it round the roundabout a couple of times it soon finds its own level.

 

[Vincey]

View attachment 9020

What you keep in the sliding door rack.?

 

[brimplas1]

2 hop ups, power tools, dust sheets and screws...... saves keep climbing in for my most common tools...The false ceiling is the most important as I can carry 15-6x3s 10 lengths of stud and all my levels, feather edges, brushes etc without moving any tools....

 

[Vincey]

2 hop ups, power tools, dust sheets and screws...... saves keep climbing in for my most common tools...The false ceiling is the most important as I can carry 15-6x3s 10 lengths of stud and all my levels, feather edges, brushes etc without moving any tools....

Looks good idea door and roof I definitely going to get mine racked proper this time I try to combine your door and roof with @Wesley s draw and drivers side storage
Happy new year

 

[Vincey]

Found this back door kitted out nice from somewhere again don't have to go in van

 

[brimplas1]

But it will all get piss wet through... I used to hand my huddys etc on and they were always soggy..

 

[brimplas1]

Oh and happy new year bud...

 

[Danny]

can I steal these photos people for something on plasterers news?

 

[brimplas1]

Why the hell not Danny. ..go for it

 

[thebearbeef]

Been desperate to get some shelving in our van for the levels edges speedskims etc so asked a mate to build them (i'd rush it and make a mess of it) and been waiting for him to do it since we bought the van. Didn't want to leave it to chance so sent him some rough plans....can't be too cautious with 3 shelves

Looking forward to seeing it done next week


Sent from my iPhone using Tapatalk

 

[Danny]

Been desperate to get some shelving in our van for the levels edges speedskims etc so asked a mate to build them (i'd rush it and make a mess of it) and been waiting for him to do it since we bought the van. Didn't want to leave it to chance so sent him some rough plans....can't be too cautious with 3 shelves

Looking forward to seeing it done next week


Sent from my iPhone using Tapatalk

What package have you used to design that? I need a good easy CAD package to do some stuff on at the moment my local engineering shop is getting fed up with cornflake boxes of sketches

 

[thebearbeef]

Its just a free app, it was very easy to use though and obviously loads more bits to use than what i did.

PadCAD Lite by Plugworks
https://appsto.re/gb/2gciD.i


Sent from my iPhone using Tapatalk

 

[zolco]

What package have you used to design that? I need a good easy CAD package to do some stuff on at the moment my local engineering shop is getting fed up with cornflake boxes of sketches

You can get autocadLT 19 quid a month I think, or get a student version for free

 

[Hair oil]

The young lad

 

[Hair oil]

Two mugs please

 

[Danny]

 

[zombie]

s**t yer s can't put a baby in that booster seat on the back!!!

Everyone knows its much safer for them on yer knee when driving! Phhhhhh

 

[Danny]

View attachment 6150 Can fit alsorts in my van!

did that with my kit car chassis