Beading 45 degree corners?????

[GARZX9R]

Hi, I'm plastering an ensuit a friend built himself,sort of half fifty pence shape, I've plastered plenty corners just off square but not as shallow an angle as these, they are about 45 degrees, will it be best stretching and forcing metal beads into place or would it be possible to use plastic beads, cheers

 

[Danny]

I would use a stop bead buddy and over hang it

 

[Danny]

Well providing I am on the same page as you

 

[bobspread]

3mm stop

 

[johniosaif]

Close the thread, it's been solved
obviously the joint will be scrimmed or taped, just in case some fool comes on about a crack.

 

[thebearbeef]

Or if your on day rate bed them on, float them out and come back for day two to skim them [emoji106]

 

[DHDRYLINING]

A stop bead will probably crack along the back edge over time. Expamet do a 135 degree bead which would be good for that

 

[kgreigh]

:RpS_laugh:

 

[Nisus]

Another basic question thread that'll end up being 10 pages long :RpS_laugh:

 

[Arti]

I dont think we've quite exhausted all the options............happens all the time on here, people being narrow minded and not looking at the bigger picture

 

[Olican]

free-hand it :RpS_thumbsup:

 

[beddy]

just paint the f**k*r

 

[Nisus]

free-hand it :RpS_thumbsup:

Then Artex it :RpS_thumbup:

 

[Fatarm]

Nail a staff bead on it..:RpS_thumbup:.......Retro.:RpS_biggrin:

 

[bubbles65]

Then Artex it :RpS_thumbup:

Then stabiliser :RpS_thumbup:

 

[zombie]

if the current angles pretty tidy just blend it in or as said stop bead hanging over a couple of mm...

its a basic as it gets mate:RpS_scared:

 

[Olican]

you need to ask yourself what would Dougie do at a time like this?

 

[markj]

Get a MT ajustable corner trowel just wanted to throw that one in the mix ...
Just to keep it going lol

 

[cathal]

you need to ask yourself what would Dougie do at a time like this?

Don't bother Dougie, just ask Tam.

 

[Hoddo]

Free style it with your finger and thumb:RpS_thumbsup:

 

[user__removed]

Paper tape with the metal in. Easy and no cracks

 

[boardfinished]

jesus fucking christ,:RpS_lol:

can one of you ***** tell me how many nails or staples it takes to put a bead on ffs?

 

[bubbles65]

What size bead mate?

 

[jamesthefirst]

Where the plasterboard has been cut put some watered down pva on and let dry. Will make bedding the stop bead easier.

 

[Arti]

jesus fucking christ,:RpS_lol:

can one of you ***** tell me how many nails or staples it takes to put a bead on ffs?

what about how much dab? or how many hits to attach hook on beads?..................told you, some narrow minded fu@kers on here

 

[boardfinished]

what about how much dab? or how many hits to attach hook on beads?..................told you, some narrow minded fu@kers on here

don't give a fu​ck

 

[bobspread]

Knock it down and build it square

 

[Nisus]

Wallcrete it

 

[Olican]

No one suggested scudding it yet :RpS_confused:

 

[Nisus]

Tile it

 

[kgreigh]

You could run a decorative corner piece insitu :RpS_thumbup:

 

[jesssop]

Artex it then run a brush up either side for a nice crisp corner

 

[Olican]

Krend it

 

[Olican]

...or monorex

 

[Nisus]

Shiplap it or matchboard it