Beads stuck on with dab? Render

[wolvoskimmer78]

Hi, pretty new to rendering got a small outdoor building to do over breezeblock the bloke stuck all beads on with dab really tight aswell? Will render fail on top off dab, should I redo them? Many thanks

 

[Deleted member 32554]

It's Friday lol

 

[John j]

No

 

[Deleted member 32554]

So that's one for not taking it off , anyone else ?

 

[smoother09]

A lot used to do it! I’m saying nothing it’s good for sticking all sorts is drywall

 

[themucky1]

Pics mate? And where in wolves you from? Who was the bloke who put em in with dab?

 

[Mouldyoldspudgun]

Take them off and stick them as you do the scratch coat but next time ask before you use board stick outside

 

[Olican]

I can only speak from experience, I have twice had to rectify work where beads had been stuck on with board adhesive and had failed. So for me it's a no. I don't know why someone would do this

 

[Rossi46]

Awful practice. Destined to fail.

 

[martinemj]

Being gypsum based it's not good....

 

[essexandy]

I don't think that you should take them off and redo them.
I do think that someone that wouldn't have asked this question should take them off and redo them. No offense.

 

[bobski]

Where the adhesive is - I think they go black/mouldy. Someone posted a photo on here a few years back.

Even though it was rendered over and weather resistant, mould appeared on the blobs where gyproc adhesive must have been used.

 

[wolvoskimmer78]

Pics mate? And where in wolves you from? Who was the bloke who put em in with dab?

I’m from wednesfield mate not got pics as I only visited yesterday

 

[wolvoskimmer78]

I don't think that you should take them off and redo them.
I do think that someone that wouldn't have asked this question should take them off and redo them. No offense.

Non taken I’ll ask him to redo them later

 

[wolvoskimmer78]

Thanks guys will show him the thread later if he thinks it will be fine. I can’t see him disagreeing tbh just a back up

 

[wolvoskimmer78]

Take them off and stick them as you do the scratch coat but next time ask before you use board stick outside

I didn’t stick them, the job I done on my own extension I used a couple of cable pins and clout nails it’s the only rendering I have done

 

[The Hobo]

So that's one for not taking it off , anyone else ?

be fine crash on

 

[Ftp321]

Thanks guys will show him the thread later if he thinks it will be fine. I can’t see him disagreeing tbh just a back up

There's a few that still use dab,
It's bad practice though I redid a job This year that had failed after 10 years Using the wrong beads and bonding to stick them

 

[Cockney]

There's a few that still use dab,
It's bad practice though I redid a job This year that had failed after 10 years Using the wrong beads and bonding to stick them

10 years ain’t bad @John j

 

[John j]

10 years ain’t bad @John j

Think it's been about 8 lol.

 

[Ftp321]

10 years ain’t bad @John j

Think it's been about 8 lol.

No it was all the same colour this render

 

[Olican]

Saw a gang of polish lads sticking all their beads on with universal one coat

 

[Cockney]

Saw a gang of polish lads sticking all their beads on with universal one coat

You sure it wasn’t @smoother09 and his lab?

 

[John j]

No it was all the same colour this render

Ot was builder who used dot .

 

[The Hobo]

There's a few that still use dab,
It's bad practice though I redid a job This year that had failed after 10 years Using the wrong beads and bonding to stick them

seen loads in Scotland bonding and neat cement the vermiculite expands and blows it to bits/went to repair a 5 sidied bay all the soffits where done it it was ringing wet

 

[Monkey Boy]

Don’t use dab
Take off.

If sparing his feelings...
Knock one off when he ain’t looking and say it didn’t work well
Take off all after that

 

[The Hobo]

Don’t use dab
Take off.

If sparing his feelings...
Knock one off when he ain’t looking and say it didn’t work well
Take off all after that

tell him its a f**k up the penny pinching c**t

 

[martinemj]

seen loads in Scotland bonding and neat cement the vermiculite expands and blows it to bits/went to repair a 5 sidied bay all the soffits where done it it was ringing wet

Rough f**k**s

 

[plastererpeter]

Seen people put them on with bonding

 

[The Hobo]

Seen people put them on with bonding

EH

 

[The Hobo]

Take them off and stick them as you do the scratch coat but next time ask before you use board stick outside

nothing nicer than nailing beads on to hard joints on a frosty morning

 

[Chris W]

all this sticking render beads on shizzle.... ive always drilled a 6mm hole stuck a red plug in and banged a galvo into the plug? sit em where you want then? prime example was a canted arch i did years ago still got the pics wish id taken some of the beads.. brickwork chopped all over the place... set you beads right an its piss easy then? stick external beads on with gypsum?? f**k**g stupid imo

 

[themucky1]

I use pink grip never had any call backs in the 3 months I’ve been doin this new render thingy

 

[loky11]

My old gaffer used to use dab for render beads and I have once years and years ago never had a call back, would Never use it now, tell him the risks of it and if he's happy for you to go over it and it fails later on its his fault not yours.

 

[Brimstone]

I use pink grip never had any call backs in the 3 months I’ve been doin this new render thingy

I'm laughing but have met someone who does, and several who use instant glue for internal beads on board.