Bent trowel

[LTJ]

Been wearing a 13inch MT in for a while and was using it on OCR which seems to have bent it only slightly the wrong way, should this come out just through trowelling up?

 

[Casper]

No. Bin it

 

[LTJ]

No. Bin it

 

[Casper]

Or give it to scruffy John j. It’s probably better than any trowels he has

 

[Olican]

 

[LTJ]

Would that be the only way?

 

[Nicm]

It can be tapped back into shape.

 

[LTJ]

It can be tapped back into shape.

On the back of the trowel like in that video?

 

[MIXERMAN]

Bent trowel.= Bent owner.

 

[LTJ]

Bent trowel.= Bent owner.

 

[Olican]

Would that be the only way?

It's the only way I've seen, I remember trying this years ago and it actually does work. Us your stainless or carbon steel?

 

[LTJ]

It's the only way I've seen, I remember trying this years ago and it actually does work. Us your stainless or carbon steel?

It’s stainless, I’ve just put the trowel edge against a flat surface on both sides and only the tiniest bit of light came through along the length of the shank, once a bit of pressure is applied it disappears, I think it’s from where render has been pushed on mainly through the middle of the trowel, would pressure from skimming get rid of this? It’s not massively bent or warped

 

[Casper]

Put the trowel away son. It’s Friday night! Go and get a beer and sit on your backside

 

[MakeItSmooth]

LMAO!

FFS!


99.9999999999% of any change in that trowel was due to what he did at 4:43

With sleight of hand like that, he should give up the plastering and become an amateur Youtube magician who does unconvincing spoon-bending!

 

[Nicm]

On the back of the trowel like in that video?

Yes just take it easy.

 

[essexandy]

f**k**g cast iron hahaha f**k**g idiot.

 

[LTJ]

LMAO!

FFS!


99.9999999999% of any change in that trowel was due to what he did at 4:43

With sleight of hand like that, he should give up the plastering and become an amateur Youtube magician who does unconvincing spoon-bending!

Tried that bending and it’s worked wonders mate

 

[Olican]

It’s stainless, I’ve just put the trowel edge against a flat surface on both sides and only the tiniest bit of light came through along the length of the shank, once a bit of pressure is applied it disappears, I think it’s from where render has been pushed on mainly through the middle of the trowel, would pressure from skimming get rid of this? It’s not massively bent or warped

I may have a broken in 13" carbon somewhere you'd be welcome to if that helps

 

[LTJ]

I may have a broken in 13" carbon somewhere you'd be welcome to if that helps

It could do mate to be honest, would you like anything for it?

 

[Olican]

It could do mate to be honest, would you like anything for it?

I'll have a rummage for it tomorrow, if your happy with it just make a little donation to charity. I'll send you a link after you've got the trowel

 

[LTJ]

I'll have a rummage for it tomorrow, if your happy with it just make a little donation to charity. I'll send you a link after you've got the trowel

cheers mate and yeah will do

 

[smoother09]

I'm constantly dissatisfied with people on this forum but hey ho!

 

[MakeItSmooth]

I'll have a rummage for it tomorrow, if your happy with it just make a little donation to charity. I'll send you a link after you've got the trowel

cheers mate and yeah will do

 

[algeeman]

Tried that bending and it’s worked wonders mate

youl only wreck your head
bin it

 

[MakeItSmooth]

Tried that bending and it’s worked wonders mate

youl only wreck your head
bin it

Said by a Mediflex owner!

 

[algeeman]

plastering is the only game where you as good as your tools

 

[algeeman]

I hate my job

 

[LTJ]

I hate my job

One gauge?

 

[algeeman]

One gauge?

small gauge

I've fell out love with plastering

 

[LTJ]

small gauge

I've fell out love with plastering

Would piss that, with 6 extra time and a red bull breakfast

 

[algeeman]

Would piss that, with 6 extra time and a red bull breakfast

our lads boarding leave cans of that shite everywhere

the smell of it

 

[LTJ]

our lads boarding leave cans of that shite everywhere

the smell of it

Toxic smell on it, not into drinking it really, can’t be good for you

 

[algeeman]

Toxic smell on it, not into drinking it really, can’t be good for you

 

[tapit]

Who does your reveals mate?

 

[LTJ]

Liquid heaven that is, not the toxic energy s**t