CeeVee
Well-Known Member
Says so here about two thirds down in the key facts that it is suitable to apply with a machine.
https://www.british-gypsum.com/products/thistle-multi-finish
https://www.british-gypsum.com/products/thistle-multi-finish
Says so here about two thirds down in the key facts that it is suitable to apply with a machine.
https://www.british-gypsum.com/products/thistle-multi-finish
Break the bank?Just think what the 200 will do
Sent from my iPhone using Tapatalk
I think he meant they can throw on a 100 m by hand twice a day, but with the machine they can do a third oneSo 2 gauges take 3 hours each then the 3rd takes 2 hours??!!
Get your deposit down heard its going to out perform similar priced machinesJust think what the 200 will do
Sent from my iPhone using Tapatalk
Hes saving up a while now I thinkGet your deposit down heard its going to out perform similar priced machines
Says so here about two thirds down in the key facts that it is suitable to apply with a machine.
https://www.british-gypsum.com/products/thistle-multi-finish
At the price and by the pallet could be lolso does that mean BG spray finish is now not needed? @BritishGypsum
Depends who you talk tooGet your deposit down heard its going to out perform similar priced machines
Saving up the pennies for a new un I think mateDid you manage to get hold of a skim spray setup craig?
I'm asking questionsYet again the PFT Brigade get on the slating bandwagon.
I don't write the reviews.... Why don't you ask the guy himself?
And yes, the M200 will out perform other machines. The M100 is like for like with the Ritmo and it performs far better than that
Oh right I see.I think he meant they can throw on a 100 m by hand twice a day, but with the machine they can do a third one
Sent from my Nexus 6P using Tapatalk
Spray finish is a different formula to multifinish, what bit did it say it is okay to spray multifinish in that link? I read the link but couldn't find itSays so here about two thirds down in the key facts that it is suitable to apply with a machine.
https://www.british-gypsum.com/products/thistle-multi-finish
I'm asking questions
So the m100 out performs the ritmo,says who?
I've heard the m200 is like for like with the ritmo m for distance and has a smaller motor?
Pumping distance 15-20m
On the key facts mateSpray finish is a different formula to multifinish, what bit did it say it is okay to spray multifinish in that link? I read the link but couldn't find it
No worries I found it cee vee in key facts bit.Spray finish is a different formula to multifinish, what bit did it say it is okay to spray multifinish in that link? I read the link but couldn't find it
Where are you based?On the key facts mate
Ok when it's out on the market get some videos up so we can see what that machine can doI'm saying the M100 is like for like with the Ritmo. The M200 out performs them both.
I know you have heard that, an surprise surprise it came from a competitor.
As stated lots of times, the U.K. version is very very different to the EU version.
Why? Because we designed the parts to go on it, we made the adaptions, this is why we went to M-tec the other week, and they have honoured our 'adaptions or changes' by only making them for the UK market.
Ok when it's out on the market get some videos up so we can see what that machine can do
No, job was a mess builder was boarding rooms as I was going through the house so cancelled it .@theplasterman
Pete did you end up hiring the eze for spraying finish?
so the machine is in the uk ?We will be mate, don't worry.
The guys who have also had demos on them have been very impressed. The sales are going well