bonding

[daz1968]

i hav e a wall to bond out it is very uneven so i will give it a good coat of carlite , but i need to know the nack in feathering the bonding with feather edge to get it nice and flat. has anybody got any tips on this .

 

[Render Systems]

hold at 45 degrees

 

[napper83]

If you dont have much experience ruling you wanna be screeding search on here there's loads of info on it

 

[patcher]

Think that you will struggle to feather in carlite bonding like you would multi finish because of the size of the perlite granules. The good thing about carlite is that it is easy to scape back when its still green. Scrape back using the edge of your trowel - handle pointing towards the wall. Hope this helps.

 

[topmark]

Its best built up using a couple of coats, first coat on, let go a bit, about 45min. top with second coat, rule off, close in when firming up.