british gypsum spray day

[plasticfantastic]

Well after 2 failed attempts to get on the day with out work taking over my life i finally got on this one!
Its well worth a day out down the BG training center The guys was wicked Joe is a top guy and after us brain storming as to how to clear the pipe :RpS_cursing: 15min set up time more like 1 hour no purge kit tried compressor and straight on the mains roding and driving over the hose got it cleared in the end :flapper::flapper:
After after that little hick-up it all went sweat as a nut.
Even down to the lunch they provided for us A++++ ((WELL DONE))

Im going to get my butt raped saying this but I think they need to bring out the spray gear like muilti and board finish if it was that readily available id choose it over muilti/board any day:RpS_thumbsup: it really is sexyness in a bag when it comes to plastering.
Im not bias but the guys that have used it or are using it youll know what im talking about.

Id really just like to take this time to say A really big big thanks to Joe you really opened my eyes as to all aspects of the trade from the set up strip down spraying and of course the flattening in and troweling up.
iv added some picks of the day just to show guys what there missing

 

[Curry]

Its very good gear but total pointless when you have to pre order up to 2-3 weeks before a project starts.Joe is a top man though :RpS_thumbsup:

 

[plasticfantastic]

It is and its min order of a pallet But if it was out there on the racks like muilti id buy all day long

 

[Curry]

Have u found out how much you can get it for? It does make multi and board feel like mud dont it!

 

[Curry]

where u from plastic?

 

[plasticfantastic]

im just out side of chatham I was told its about the same price as muilti there's no grain nothing its like baking flower.
dont know what its like whisked up then off the stop is it the same as muilti and board then builder bucket of water for full bag mix
just mix it like finish how you like it?? or wet then let it pick up first????

 

[spunky]

Is it less than 3 quid per bag?

 

[plasticfantastic]

no but i know your not getting less then £3 per bag. with vat
even big firms like higgens redrow ect cant get it that cheap even by the lorry load no i know your talking pony

 

[Curry]

You thinking of getting a ritmo then plastic?

 

[warriorupnorth]

I didn't like Jo that much when me and some of the lads wwnr down there, he made me knock a wall down that firemen couldn't break through @Nisus @essexandy @irishspread @Danny

 

[plasticfantastic]

a guy i work with has one im trying to push him into using his powercoat for finish

 

[plasticfantastic]

I didn't like Jo that much when me and some of the lads wwnr down there, he made me knock a wall down that firemen couldn't break through @Nisus @essexandy @irishspread @Danny

thats the new board isnt it? with the ply backing

 

[warriorupnorth]

Yeh there new super duper tough board

 

[essexandy]

I didn't like Jo that much when me and some of the lads wwnr down there, he made me knock a wall down that firemen couldn't break through @Nisus @essexandy @irishspread @Danny

That was funny as f#ck Paul, the way you launched at that wall with a hammer lol.

 

[Curry]

a guy i work with has one im trying to push him into using his powercoat for finish

Im from gillingham if you ever wanna see one being used on site. Who u work with? Im on the look out for internal sprayers for some of the bigger stuff we have in the pipe line

 

[warriorupnorth]

@plasticfantastic who's the fat guy spraying, he's fatter than @kebabking @beddy

 

[Curry]

Why buy a powercoat and not spray finish? Surely he has all the kit?

 

[plasticfantastic]

render kit not skim but time will tell what have you got buddy

 

[Curry]

Powercoat 110v with render, skim, acrylic gun and hopefully paint spray kit soon

 

[plasticfantastic]

sounds like your going for it big time but you cant use all the extras at once 2nd machine 2nd machine

 

[spunky]

no but i know your not getting less then £3 per bag. with vat
even big firms like higgens redrow ect cant get it that cheap even by the lorry load no i know your talking pony

3.09p plus vat how much is spray finish?

 

[Curry]

28.09p+VAT per m2 for multi 28.8p+VAT per m2 for spray

 

[Curry]

I don't get multi that cheap either

 

[PLASTAMASTA]

Im from gillingham if you ever wanna see one being used on site. Who u work with? Im on the look out for internal sprayers for some of the bigger stuff we have in the pipe line

@CurrierPlastering, I'd like to see a ritmo up and running on site being used by someone who knows what there doing. Would you mind me having a nosey?

 

[UKPlasteringmachines]

i was supposed to be at that demo but got held up on another job ...i even had a purge hose in the back of my van (

 

[plasticfantastic]

I know you let us down bad boy jo was nearly crying in his coffee

 

[UKPlasteringmachines]

Im sorry

 

[Curry]

@CurrierPlastering, I'd like to see a ritmo up and running on site being used by someone who knows what there doing. Would you mind me having a nosey?

@PLASTAMASTA We have a school in Batley near leeds if that's any good to you

 

[warriorupnorth]

@PLASTAMASTA We have a school in Batley near leeds if that's any good to you

Let me know when you start it Steve , I'll come a visiting :RpS_wink::RpS_wink:

 

[jcrplast]

How do you stop spray from hitting other walls, or you lay on the whole room ?.:RpS_scared:

 

[Curry]

Let me know when you start it Steve , I'll come a visiting :RpS_wink::RpS_wink:

Will do

 

[UKPlasteringmachines]

Im coming as well .... I need to come and see you spraying anyway steve

 

[plasticfantastic]

We will all come for the day to watch the little men in orange jackets spraying :RpS_thumbsup:

 

[UKPlasteringmachines]

You are talking about leeds in kent aint ya .... You can all buy me pies and chips and donuts and fizzy pop

 

[PLASTAMASTA]

@PLASTAMASTA We have a school in Batley near leeds if that's any good to you

@currier plastering. Yeah that's a bit closer for me than Kent. When will you be up there? PM me details please or your contact number and il give you a ring to arrange. Thanks