Brum/cov work, reliable spreads needed

yeah should be full bed of adhesive behind tiles unless you're a dot n dabber plenty of chancers in tiling as well
So plasterers need to use concrete boards or moisture board in case tilers don't do their job properly....

This gets better and better.
First moisture ingress, then weight, now tilers. Fascinating stuff
 
So plasterers need to use concrete boards or moisture board in case tilers don't do their job properly....

This gets better and better.
First moisture ingress, then weight, now tilers. Fascinating stuff
A decent new build normally has a good spec and defo don’t have any grey board in bathrooms , either mr or wedi backer tile board. I’ve done houses where they’ve had 1200x600 marble and u wouldn’t want to hang/install that on grey board
 
well you say you don't see the point mate but at the end of the day they don't make MR boards or any of the other boards for the fun of it they serve a purpose pal....some boards are better than others for specific applications.

I just don't get it mate on here sometimes

Is it me just being fkin pig-headed or what?

I spent best part of the last 20 years of my career retro-fitting sound proofing and I used sound proofing boards....why? because they're better than standard boards for the job and didn't cut corners.

I'm retired now as you know but maybe I worked at a time where integrity mattered in the trade or is it because I was a 100% private/domestic spread and not a site monkey (never worked on a site in my life) where it seems time and money matters more than integrity, quality and attention to detail?

It just seems to me nowadays mate especially when I see some of the crap on here that this trades integrity has had the bollox stripped out of it.......it's a shame.
Congratulations on retirement mate
 

This gets better and better.
First moisture ingress, then weight, now tilers. Fascinating stuf
Everything you do has a knock on effect
Everyone no matter what their trade should leave their particular job as best as they possibly can so that the customer ends up with the best possible job and value for money.

It’s obvious to me in your case that you have a piss poor work ethic

it’s cuuntts like you that drag the whole fkin trade down
 
Last edited:
popcorns on me

Everything you do has a knock on effect
Everyone no matter what their trade should leave their particular job as best as they possibly can so that the customer ends up with the best possible job and value for money.

It’s obvious to me in your case that you have a piss poor work ethic

it’s cuuntts like you that drag the whole fkin trade down
Or I just know better tilers than you
 
A decent new build normally has a good spec and defo don’t have any grey board in bathrooms , either mr or wedi backer tile board. I’ve done houses where they’ve had 1200x600 marble and u wouldn’t want to hang/install that on grey board
A decent new build. There's an oxymoron if I've heard one.
You'll have to look that word up Carl
 
If ya say so. Got over 20k labour of work booked in by the end of august.

And I'm on the golf course tomorrow :cool:

You forgot to tell everyone that that 20k labour isn't for plastering - it's for regurgitating propaganda as loudly as you can on internet forums, like a good little bought-&-paid-for shill.
 
Sadly yes
don't knock it to much mate....... provides for the clan, puts food on table and beer in ye belly
your time will come pal when you can sit back and relax
we're all cnuts at end of day for doing this fkin job mate as we all know there are easier ways to earn a dollar but take solace in knowing that some cnuts are bigger than others in trade ;) @Nath80
 
at least we found out Nath is a cowboy.
Brum/cov work, reliable spreads needed
 
don't knock it to much mate....... provides for the clan, puts food on table and beer in ye belly
your time will come pal when you can sit back and relax
we're all cnuts at end of day for doing this fkin job mate as we all know there are easier ways to earn a dollar but take solace in knowing that some cnuts are bigger than others in trade ;) @Nath80

@John j simply isn't drinking enough to numb the pain :cool:
 
A decent new build. There's an oxymoron if I've heard one.
You'll have to look that word up Carl
Oxymoron u sound like a right pussy hole plasterer. I bet your self taught and defo not timed served with the tosh that comes out your gob
 
Jonny n Casper get some stick yeah but they’re fkin sound with it,ye can have a right laugh with em, both cracking guys in real life I’m sure whereas nath…..ye can just tell by the way he chats on here he’s an out n out 100% top drawer keyhunt
Nothing but net
 

Attachments

  • VID_20210625_092710.mp4
    15.1 MB
Back
Top