Brushes

J

john c

Member
Brushes

Anyone know of any tricks to straighten the bristles?
 
Soak in warm water for half hour. Shake out. Wrap in cling film to get the shape correct. After a few days it will be fine and dry out.. Don't store brush bristle down in a bucket or it will look like yours. Dry out laying flat.. Store laying flat
 
I have a cheap one, went like a yard brush in a couple weeks, was disappointed as, although cheap ones work with all have them and claimed them to be good, so I bought a new one and started uni bonding concrete heads or whatever needs unibonded with it. Luck would have that didn't have much skimming to do for a few weeks was all sand cement, and the brush came back into shape. Wouldn't normally care as they less than a tenner, but the bristles are lovely and soft, great for walking ceilings. My old brush I have is a t-class or something like that, cracking brush, but a bit ignorant when have to run it on the ceilings, dug in a bit on me,better to flick, which is a pain in the ass running ceilings having to flick the water on.
 
I jet wash mine , that will sort it , just be careful if you are holding the brush though while jet washing it
 
Ffs... Spend ten bob on a new one:rolleyes:
Bet the bristles were about 6 inch long when you bought it four years agoo_O
 
Haha nah that one cost 40 quid
I was gonna just dump it but thought I would ask on here first
Will give the cling film trick a try and dump it then if that doesn't work
 
Cornelius said:
Was the superprof brush any good? I normally spend £10-£15 on a 4 inch brush with nice bristles, lasts ages I like to have nice clean trowelling water.[/QUOTE

It’s the best ,
Get yourself a Collomix bucket cleaner too then always have small bucket of clean available for good job mate
Click to expand...
 
Don't chuck it in the skip. Soak in petrol or universal brush cleaner then steel brush and then spin until dry. Hang vertical for 12 hours. Good as new.

Envoyé de mon Moto G (5S) en utilisant Tapatalk
 
WWBRenovation said:
Don't chuck it in the skip. Soak in petrol or universal brush cleaner then steel brush and then spin until dry. Hang vertical for 12 hours. Good as new.

Envoyé de mon Moto G (5S) en utilisant Tapatalk
Click to expand...
When you say spin until dry, do you mean hold the brush at arms length and twirl about....... perhaps in the middle of the street... looking up to the sky.... laughing in delight...?
 
WWBRenovation said:
Don't chuck it in the skip. Soak in petrol or universal brush cleaner then steel brush and then spin until dry. Hang vertical for 12 hours. Good as new.

Envoyé de mon Moto G (5S) en utilisant Tapatalk
Click to expand...
And once you've done this and the petrol is full of crap;
bung it in the fuel tank of the first electrician that happens along.
Two birds one stone.
 
All these willy wackers who profess to be earning 1500 a week won’t spend a tenner on a brush the world gone mad
 
A decent 6” brush is a very important tool, the cheap ones are sh it.......................................

And no! I don’t use an inch brush for my internals like you rough fu ckers on here:coffe:
 
JessThePlasterer said:
When you say spin until dry, do you mean hold the brush at arms length and twirl about....... perhaps in the middle of the street... looking up to the sky.... laughing in delight...?
Click to expand...
Exactly, but don't forget to click your heels three times saying " there's no place like home, there's no place like home..."

Envoyé de mon Moto G (5S) en utilisant Tapatalk
 
Pagey said:
Speechless at the tightness of this thread
Click to expand...

You've never met @Nisus have you? o_O He's not tight, he's cross threaded.

His 20 year old adhesive tub collection is a sight to behold, and I'm neither joking nor exaggerating for comedic effect!
 
To quote plastering's own Confucius "Tools earn you bread and butter". :LOL:
 
superspread said:
A decent 6” brush is a very important tool, the cheap ones are sh it.......................................

And no! I don’t use an inch brush for my internals like you rough fu ckers on here:coffe:
Click to expand...
Got that tenner for the 4” I sold you yet?
 
You must log in or register to reply here.

Share this page

Back
Top