Bucket trowel

Status
Not open for further replies.
I use the top of a 5l tub if im scooping out of a bucket the handle part just cut the top of the tub with a stanley when its set just bash it out job done
 
How ya doing nis what happened to image and what you doing now im ok for work at the moment renovating a five bed detached house just finished plastering all the upstairs beds.baths and hall stairs landings
 
Did you buy it from the manufacturers because if you did they will replace it .was the blade riveted or spot welded so if you want me to get it replaced for you pm me and return the broken one and i will get changed.
 
pftmonojetman said:
Too late jimmy i chucked it in the skip ages ago the handle was welded on and no i didnt clean it with a hammer lol
Click to expand...
Sad to hear that all the blades are now riveted to give it a lot more strength if you pm me with your details i will send you one in the post try it again and all i ask is for your opinions of it cheers jim
 
lucius said:
I broke loads of them.
Click to expand...
Ha Ha nice try boys but i do know the score The Trowhawk is here to stay riveted blade. Soft ergonomic handle . And trust me now its very robust and strong .Its good to have in ya kit bag so pack up ya trowhawk in ya old kit bag and smile smile smile.
 
Uncle Jim I want one for scraping out gorilla tubs when I'm floating. Do me a family discount x
 
jimfish said:
Ha Ha nice try boys but i do know the score The Trowhawk is here to stay riveted blade. Soft ergonomic handle . And trust me now its very robust and strong .Its good to have in ya kit bag so pack up ya trowhawk in ya old kit bag and smile smile smile.
Click to expand...
:RpS_wink:
 
I'm after a new bucket trowel I was going to bu a bricks trowel and trim the end square so it's a bit round on the edges like a marshalltown bucket trowel
 
until a yr or so ago i always used to use my trowel. but not the back side of it, so it didnt get dirty.... its quicker than a bucket trowel
 
Sorry mate I can't find the PM function.

I bought one of your riveted trowels the other day but haven't used it as it looks like it with damage my trowel. the revits have bent the trowel so only the edges make contact. The rivets themselves also sit proud so it looks like they will chip my trowel too.

I was going to take the trowel to a metal worker and have them sort it out but was wondering if you have had the problem with other trowels or if this is a one off?

...bit gutted really as its a good idea but I like to look after my tools.
 
nick0412 said:
until a yr or so ago i always used to use my trowel. but not the back side of it, so it didnt get dirty.... its quicker than a bucket trowel
Click to expand...
didnt get dirty you are joking ive never seen such dirty trowels as yours:RpS_lol:
 
kINGPIN said:
Sorry mate I can't find the PM function.I bought one of your riveted trowels the other day but haven't used it as it looks like it with damage my trowel. the revits have bent the trowel so only the edges make contact. The rivets themselves also sit proud so it looks like they will chip my trowel too. I was going to take the trowel to a metal worker and have them sort it out but was wondering if you have had the problem with other trowels or if this is a one off?...bit gutted really as its a good idea but I like to look after my tools.
Click to expand...
I would too I bet there all brand new
 
Gibbo, I haven't got any problems with spunklicker. I just seems that every thread I have read has had him in it whining about coursers, money, wages etc. I've only been here a few weeks and I'm already bored of it, so god knows what everyone else is thinking. I just think this forum could do with giving him a kick up the arse as it would make for a better atmosphere.
 
Status
Not open for further replies.

Share this page

Back
Top