catnic box section

[henry]

What is the correct way for fixing plastboard to a catnic box section.

Cheers H

 

[superspread]

If its the one with the holes I would of thought dot and dab

 

[bubbles65]

I tend to run a tight coat over the lintel and then apply some more to the board and push it into place. Support the underside overnight if possible :RpS_thumbup:

 

[henry]

Cheers lads yer got plenty of board props and clamps .

 

[bubbles65]

Why you asking H? :RpS_sneaky:

 

[johniosaif]

Grip fill

 

[zombie]

Am I missing something here? Do you just mean the metal styley with lots of holes?

If so ive always just dabbed....

Good tip is to dab the sides on leave them hanging to long then pencil line them level with spirit level cut with knife...then screw some slate lats to the inside of either side then can screw under side apposed to having to prop etc if big

Zombie

 

[zombie]

mean screw through the sides (cheeks) of the plasterboard into length of slate latte....can then screw up the (header) apposed to having to dot and prop like!

Zombie

 

[jamesthefirst]

I tend to run a tight coat over the lintel and then apply some more to the board and push it into place. Support the underside overnight if possible :RpS_thumbup:

With a labourer?
Dont you just hate those microwave dinners, I don't like the bit at the end when you have to stand for 1 minute!:RpS_unsure:

 

[bubbles65]

WTF? :RpS_confused: