Collomix cordless mixer

[S a plastering]

Has anyone got or tried one of these just wondering how they compare with the new dewalt cordless cheers

 

[Gavine The First]

Has anyone got or tried one of these just wondering how they compare with the new dewalt cordless cheers

Good call, was going to stick up a post as I need to buy a cordless. Have a couple of common stair repairs lined up and sick of relying on the residents for power and water. Any thoughts ? Cheers

 

[S a plastering]

Ive just started 16 new builds no 110 even yet fckin miles away were on a genny but a pain in the dcik rather just pull a cordless along ???????

 

[S a plastering]

Herad that the collomix is good just wanted a review on it wete mainly skimming so not smashing dri wall around with it

 

[Gavine The First]

Ive just started 16 new builds no 110 even yet fckin miles away were on a genny but a pain in the dcik rather just pull a cordless along ???????

Have been looking, I need to, too busy talking shite on here though Tbh

 

[Gavine The First]

Herad that the collomix is good just wanted a review on it wete mainly skimming so not smashing dri wall around with it

How much ?

 

[Deleted member 32554]

Laugh if you want but get one of these , at least as an intermediate and long term back up , will mix dab as well ( 2 geared )

Plaster Mixer 1800W Pro Single Paddle Stirrer For Plaster Paint Cement Mortar | eBay

Power: 1800w. 1 Pro Mixer Stirrer. Paddle Size: Approx. Speed switch: 6-speed thumb switch. The unique handle design results in the perfect hand position with 15 degree tilt for fatigue-free operation.

rover.ebay.com

 

[Gavine The First]

How much ?

Bonding and skim, just want somthing decent, thats not a kings ransome .

 

[Gavine The First]

Laugh if you want but get one of these , at least as an intermediate and long term back up , will mix dab as well ( 2 geared )

Plaster Mixer 1800W Pro Single Paddle Stirrer For Plaster Paint Cement Mortar | eBay

Power: 1800w. 1 Pro Mixer Stirrer. Paddle Size: Approx. Speed switch: 6-speed thumb switch. The unique handle design results in the perfect hand position with 15 degree tilt for fatigue-free operation.

rover.ebay.com

Cheers for that pal, it needs to be cordless though.

 

[The Hobo]

Good call, was going to stick up a post as I need to buy a cordless. Have a couple of common stair repairs lined up and sick of relying on the residents for power and water. Any thoughts ? Cheers

buy a generator and feed a drop pipe into a big tub pisses down most days/failing that ask MARY on ground floor for all your needs mention my name if u want

 

[S a plastering]

How much ?

£479 for the collomix 2 battery 18v and 5.4 amp

 

[S a plastering]

Laugh if you want but get one of these , at least as an intermediate and long term back up , will mix dab as well ( 2 geared )

Plaster Mixer 1800W Pro Single Paddle Stirrer For Plaster Paint Cement Mortar | eBay

Power: 1800w. 1 Pro Mixer Stirrer. Paddle Size: Approx. Speed switch: 6-speed thumb switch. The unique handle design results in the perfect hand position with 15 degree tilt for fatigue-free operation.

rover.ebay.com

Ive got plenty of powered mixers mate want a cordless

 

[brimplas1]

Has anyone got or tried one of these just wondering how they compare with the new dewalt cordless cheers

Look at the tape slayer on you tube, he rates the metabo over the dewalt.....

 

[Gavine The First]

Look at the tape slayer on you tube, he rates the metabo over the dewalt.....

Dewalt sound better for me though, all my power tools are Dewalt, better for battery change, will have a look. Bet its not cheap though.

 

[Gavine The First]

Look at the tape slayer on you tube, he rates the metabo over the dewalt.....

Will have a gander though , thanks.

 

[Deleted member 32554]

Ive got plenty of powered mixers mate want a cordless

I'd be lost if I started to pay attention to the op
When cordless came out I was given a 12v by a site foreman as he was upgrading , 4hr to charge lol so I used a small car battery and ran some light flex to it .
For my next trick when I got my next it was with 4/5 amp hr , those were heavy batteries and your wrist would feel it at the end of the day so that sat in my pocket with some flex attached.
The patent was taken out for this idea in 2011 , about 25 y later , born to be poor lol

 

[Gavine The First]

£479 for the collomix 2 battery 18v and 5.4 amp

f**k that, its only for wee hits to save carrying a transformer up 4 flights of stairs or patch ups on stairwells, was thinking 280 max. Maybee i'm being a tight c**t though ?

 

[Gavine The First]

I'd be lost if I started to pay attention to the op
When cordless came out I was given a 12v by a site foreman as he was upgrading , 4hr to charge lol so I used a small car battery and ran some light flex to it .
For my next trick when I got my next it was with 4/5 amp hr , those were heavy batteries and your wrist would feel it at the end of the day so that sat in my pocket with some flex attached.
The patent was taken out for this idea in 2011 , about 25 y later , born to be poor lol

Quality !!!

 

[S a plastering]

f**k that, its only for wee hits to save carrying a transformer up 4 flights of stairs or patch ups on stairwells, was thinking 280 max. Maybee i'm being a tight c**t though ?

Thats good for a quality machine

 

[Gavine The First]

I'd be lost if I started to pay attention to the op
When cordless came out I was given a 12v by a site foreman as he was upgrading , 4hr to charge lol so I used a small car battery and ran some light flex to it .
For my next trick when I got my next it was with 4/5 amp hr , those were heavy batteries and your wrist would feel it at the end of the day so that sat in my pocket with some flex attached.
The patent was taken out for this idea in 2011 , about 25 y later , born to be poor lol

Whats the op ?

 

[S a plastering]

Or look at the metabo 18v german again good quality

 

[Gavine The First]

Ye ,

Thats good for a quality machine

Ye, I know,your right ! No point in buying shite, false economy. Need to splash out, will prob go Dewalt, like my tools to match ! So F*****g G** eh !

 

[Gavine The First]

Or look at the metabo 18v german again good quality

Will do , cheers mate

 

[S a plastering]

Ye ,

Ye, I know,your right ! No point in buying shite, false economy. Need to splash out, will prob go Dewalt, like my tools to match ! So F*****g G** eh !

You will be right with dewalt my son has just got one looks good ive not used it yet though

 

[Vincey]

Feel bad saying it but heard yesterday friends dewalt blew up only few months old Anyone else had a problem?

 

[Gavine The First]

Feel bad saying it but heard yesterday friends dewalt blew up only few months old Anyone else had a problem?

No, not that bad but the small drill/driver has a fault, you can't turn it onto hammer action mode, my mate has the same one and has the same problem. Design fault, imo.

 

[smoother09]

I've had my DeWalt cordless well over a year took loads of battering still going strong that a mixture of all materials skim hardwall, bonding thin coat even sand and cement highly recommend!

 

[Gavine The First]

I've had my DeWalt cordless well over a year took loads of battering still going strong that a mixture of all materials skim hardwall, bonding thin coat even sand and cement highly recommend!

How much ?

 

[smoother09]

How much ?

Think I payed about £650 can't remember but a good corded is £400 anyway and I have both so there

 

[Gavine The First]

Think I payed about £650 can't remember but a good corded is £400 anyway and I have both so there

Is it play time yet ?

 

[Danny]

I am getting one to trial soon... I will compare it to the dewalt