EWI Pro thin coat question

[Jofo]

Hi all,

Given the weather, anyone got any experience on how dry the base coat needs to be before priming and top coating?

Been told bone dry by supplier, but don’t think that is possible in this weather. Has anyone any experience with putting on the top coat when the base is still a bit damp?

 

[Hhj]

Hi all,

Given the weather, anyone got any experience on how dry the base coat needs to be before priming and top coating?

Been told bone dry by supplier, but don’t think that is possible in this weather. Has anyone any experience with putting on the top coat when the base is still a bit damp?

We put all our base coats on throughout winter and topcoat in summer usually leave it 6 months

 

[Elite exteriors]

Hi all,

Given the weather, anyone got any experience on how dry the base coat needs to be before priming and top coating?

Been told bone dry by supplier, but don’t think that is possible in this weather. Has anyone any experience with putting on the top coat when the base is still a bit damp?

It's really possible, they need to be dry end of

 

[Gurva]

Hi all,

Given the weather, anyone got any experience on how dry the base coat needs to be before priming and top coating?

Been told bone dry by supplier, but don’t think that is possible in this weather. Has anyone any experience with putting on the top coat when the base is still a bit damp?

Leave it till it’s cured,I’ve had it fail days later with the rain!supplier is correct

 

[themucky1]

Hi all,

Given the weather, anyone got any experience on how dry the base coat needs to be before priming and top coating?

Been told bone dry by supplier, but don’t think that is possible in this weather. Has anyone any experience with putting on the top coat when the base is still a bit damp?

Yes

 

[Dollar]

You can /would be able to (rub the primer off) 24hr later if base is damp/wet

 

[Dansouthcoast84]

this temp leave 7 days and 24hrs after priming.

temps 5 to 10 degrees leave longer before priming

 

[Runswithscissors]

Leave it till it’s cured,I’ve had it fail days later with the rain!supplier is correct

OMG!!!!
Danny - close this thread down, pin it to the top of the forum!!!

A post has said the supplier is correct!!!

Either that, or thumb screws and apology from Gurva


Sorry ….. doesn’t happen often….

 

[Runswithscissors]

OMG!!!!
Danny - close this thread down, pin it to the top of the forum!!!

A post has said the supplier is correct!!!

Either that, or thumb screws and apology from Gurva


Sorry ….. doesn’t happen often….

For the record - I agree…..

 

[Jofo]

7 days to prime, 24 post prime to top. Presuming it doesn’t get rained on.

Got it thanks all.