External wall insulation

[lee2012]

Hi there I'm looking to apply 40 MM. insulation followed by a monocoche finish.
What is the best system to use?

 

[Orangemachineman]

Parex is the best for this system
Ring your local rep for info mate

 

[vfr12]

What's the 40mm -eps

 

[Dansouthcoast84]

i dont believe mono cant be done or warranted on eps.
could be wrong but check with manufacturer

 

[Orangemachineman]

Parex ehi is decent

 

[smedhead]

I have sprayed weber m1 straight onto poly boards and it was all good (100% rasp boards first)

 

[lee2012]

Cheers for help .
Can you put a thin coat render system over painted render.
Is there a bonding agent?

 

[Leeroy]

Cheers for help .
Can you put a thin coat render system over painted render.
Is there a bonding agent?

Parinter from Parex mate

 

[lee2012]

The 40 mm they wanted cellotex then fibreglass mesh/or stainless steel. Followed by some sort of monocouche!!

 

[vfr12]

Says it all.Comming close To the day when I will see EWI with tiles

 

[Orangemachineman]

The 40 mm they wanted cellotex then fibreglass mesh/or stainless steel. Followed by some sort of monocouche!!

What on earth are you on about?
If your not sure what your doing pass the job on

 

[vfr12]

Yep, the spec is ok 40mm + eml, but no render for up to 40mm insulations. The recommendation is tiles. If you want render fnish change the size of the insulation.

 

[lee2012]

Thought the idea of a forum was to get help and ideals !!!

 

[lee2012]

Thanks that helpfully more then the other guy

 

[22jasper]

Parex Maite, AVU 355 ,Mesh EHI Topcoat