EZE 24 skim or airless set up

[CeeVee]

Is it the same set up for both? Or is it nearly £500 plus vat for each set up?
Cheers

 

[MikeAtthis]

And a ritmo will knock it for you


Sent from my iPhone using Tapatalk

 

[CeeVee]

My goal is to get a ritmo one day...however baby steps for me. Got an Eze to try my hand.

 

[Plasterers1StopShop]

Is it the same set up for both? Or is it nearly £500 plus vat for each set up?
Cheers

The M-tec M200 should be your goal ;-)

The airless and skim set up are very different mate. £460.00 + VAT each.

 

[Plasterers1StopShop]

And a ritmo will knock it for you


Sent from my iPhone using Tapatalk

I suppose top coat needs knocking up.... What the machine is designed for.

Oh yes, and airless.

 

[stiltwalker]

The M-tec M200 should be your goal ;-)

The airless and skim set up are very different mate. £460.00 + VAT each.

So when is the price and data released on this puppy?

 

[Plasterers1StopShop]

So when is the price and data released on this puppy?

Within the next few weeks mate, we have been busy with machines going out recently. I'm off to M-tec soon for a meeting about it.

Will update everyone shortly

 

[CeeVee]

Just make it under a grand and I'll definitely get one

 

[CeeVee]

So what exactly comes with each eze set up?

 

[Vincey]

The M-tec M200 should be your goal ;-)

The airless and skim set up are very different mate. £460.00 + VAT each.

£460 for the m200 ?

 

[Plasterers1StopShop]

£460 for the m200 ?

No mate, for the airless or skim setup for the EZE 24

 

[Plasterers1StopShop]

So what exactly comes with each eze set up?

Give me a call Monday and I will give you the lists mate. Off to bed now

 

[MikeAtthis]

I suppose top coat needs knocking up.... What the machine is designed for.

Oh yes, and airless.

and the point in this when i think he wants it for skim lol

 

[Rossi46]

@CeeVee you can buy my skim setup if you want.

 

[CeeVee]

Done. Pmed you

 

[user__removed]

That skim set up is ace for getting microgobetis on, just need a smaller than skim nozzle.

 

[Rossi46]

I just use a hopper gun. A lot easier and less cleaning.

 

[user__removed]

I just use a hopper gun. A lot easier and less cleaning.

Have you tried it with your eze

 

[theclemo]

Give me a call Monday and I will give you the lists mate. Off to bed now

Can I come

 

[Rossi46]

Have you tried it with your eze

I haven't to be honest. It's the cleaning down that put me off.

 

[beddy]

That skim set up is ace for getting microgobetis on, just need a smaller than skim nozzle.

Ill have one!

Sent from my GT-I9195 using Tapatalk

 

[user__removed]

I haven't to be honest. It's the cleaning down that put me off.

It's so accurate to spray with barely any mess.
I sprayef on 0 speed the other day and covered 120 m2 in an hour and half and that was with alot of stopping to drink coffee and chat.
It's also nice to be able to reach high with that lance.
Drop film the hopper and the cleaning is minimal.
On this job a roller wouldn't of touched it, it would of been a brush job for 2 men for a day easy. Glad I used the eze on my own.

 

[user__removed]

Also it's less messy to have an empty bucket at the wall, when finished spray into the bucket then shut the valve off.

 

[Rossi46]

It's so accurate to spray with barely any mess.
I sprayef on 0 speed the other day and covered 120 m2 in an hour and half and that was with alot of stopping to drink coffee and chat.
It's also nice to be able to reach high with that lance.
Drop film the hopper and the cleaning is minimal.
On this job a roller wouldn't of touched it, it would of been a brush job for 2 men for a day easy. Glad I used the eze on my own.

I'll have to give it a go. How much is the smaller nozzle?
Hopper gun is fairly accurate but there is a bit of overspray. It's just so easy with just the compressor, air pipes and gun. Not much to lug about. Cleaning takes 2 minutes.

 

[user__removed]

I'll have to give it a go. How much is the smaller nozzle?
Hopper gun is fairly accurate but there is a bit of overspray. It's just so easy with just the compressor, air pipes and gun. Not much to lug about. Cleaning takes 2 minutes.

Fair enough stick with that then.

 

[Curry]

The M-tec M200 should be your goal ;-)

The airless and skim set up are very different mate. £460.00 + VAT each.

Why?

 

[keithuk]

If it was me ,i would listen to Curry ,he is out there doing it !!

 

[Plasterers1StopShop]

Why?

To be honest, writing very different was incorrect. I'm going to re-do the additional setup price if one is already purchased.

For example, the machine come with the render setup. If the skim setup is required then that's an extra £460. If you purchase that then want the airless it won't be £460.

The guns are completely different on each setup as are the hoses

 

[user__removed]

To be honest, writing very different was incorrect. I'm going to re-do the additional setup price if one is already purchased.

For example, the machine come with the render setup. If the skim setup is required then that's an extra £460. If you purchase that then want the airless it won't be £460.

The guns are completely different on each setup as are the hoses

Could I adapt my eze to run airless without a visit to the doctor.

 

[Plasterers1StopShop]

Could I adapt my eze to run airless without a visit to the doctor.

We just need to send you the bits mate

 

[theclemo]

We just need to send you the bits mate

I can't get my head around how it will work tbh