G4 light !

Status
Not open for further replies.
C

Cfp

New Member
Does anyone know someone who is selling a g4 light , spray render machine secondhand ? Must be in good condition .. Inbox me
 
Is this the best machine for weber , monocouche anyone know anything about this machine or any other ?
 
You cant recieve PM's your post count is not high enough also the information is on the forum just do a search.
 
How many posts before I can receive pm's etc ? Anyone with a secondhand spray render machine for sale let me know , thanks ..
 
G4, G5 & Monojet 3 phrase are all good for mono. Plenty of power and pumping distance.

Ritmo,s are getting good reviews on here. Not quite the pumping distance or as high output as a 3 phrase but there again light enough to get onto a scaffold and the 240v can be off the mains if site conditions allow. Bear in mind with a 3 phrase you will need a genny to suit.

Loads of PFT users on here for advise and the PFT dealers will look after you. Ring PFT Northern for spares and they are in stock and delivered next morning.
 
Last edited:
To be honest we are just getting into polymers , knocking sand and cement on head all our job's to date have been hand applied but as you probably know it's hard work we have been in close contact with weber since starting using there products and all the lads including myself are going on there course . The machine will stay in the yard until we are fully versed in it's use ..
 
Cfp said:
To be honest we are just getting into polymers , knocking sand and cement on head all our job's to date have been hand applied but as you probably know it's hard work we have been in close contact with weber since starting using there products and all the lads including myself are going on there course . The machine will stay in the yard until we are fully versed in it's use ..
Click to expand...
We got our G4 of PFT Northern ,good machine and their after sales back up is second to none ,best of luck with it mate :RpS_thumbup:
 
Thank's Keith ! Yeah I think we are going to go with pft , they say they have some used machines coming in soon . I might just get a completely new set up yet ..
 
Cfp said:
Thank's Keith ! Yeah I think we are going to go with pft , they say they have some used machines coming in soon . I might just get a completely new set up yet ..
Click to expand...
I got mine new ,that gave me the peace of mind . I always say a machine is not "plug and go "when you first buy one ,so the back up is what you will need ,but you will soon get your head around it
 
That's what I was thinking ! I don't expect instant results its going to take time to get used to its operation , pit falls etc the jobs seem to be getting bigger so machine is the way forward were not millionaires but I'm confident in time we will recoup what we lay out and most importantly be doing things the right way .
 
Cfp said:
That's what I was thinking ! I don't expect instant results its going to take time to get used to its operation , pit falls etc the jobs seem to be getting bigger so machine is the way forward were not millionaires but I'm confident in time we will recoup what we lay out and most importantly be doing things the right way .
Click to expand...
That is the way to look at it mate ,it is a lot of money ,but in time you will not look back . If you could have someone with you for a week that can show you the ropes ,that would save you time and money in the long run .
 
Got a couple of reasonable size jobs in pipeline just waiting for go ahead one in Stratford upon Avon there not massive but perfect for first runs with machine i'll go down hack off and rend aid it beforehand ! we put down to be working away for one , so if you know anyone who fancy's a couple of days all expenses paid who is machine savvy . Let me know
 
Cfp said:
Got a couple of reasonable size jobs in pipeline just waiting for go ahead one in Stratford upon Avon there not massive but perfect for first runs with machine i'll go down hack off and rend aid it beforehand ! we put down to be working away for one , so if you know anyone who fancy's a couple of days all expenses paid who is machine savvy . Let me know
Click to expand...
Let me know near the time ,if we are in-between jobs ,might be able to help out mate
 
Cfp said:
Got a couple of reasonable size jobs in pipeline just waiting for go ahead one in Stratford upon Avon there not massive but perfect for first runs with machine i'll go down hack off and rend aid it beforehand ! we put down to be working away for one , so if you know anyone who fancy's a couple of days all expenses paid who is machine savvy . Let me know
Click to expand...

I hope your gonna use the machine to apply the renaid?? its just so quick ;)
 
I'll have another look I just put in spray render machine and it brought up that utiform , put in g4 nothing came I'll try again ...
 
To be honest I didn't know if you could machine apply the rend aid I thought it would put in on too thick ?
 
All to do with rotar and stators speeds and gun cap nozzle sizes. Plenty of lads on here will advise but as you will be probably buying the parts of Les at PFT Northern he will advise you what r&s you need and nozzle sizes.
 
If you do buy second hand from a private sale I suggest you take it to PFT Northern for a service and then get training into how to use it both physically and be PFT approved (health & safety). If you are miles away you could send it by pallet first and pick it up after training. But to save a lot of hassle buy of them if you can.
 
Yeah that's what I'm going to do ! Going to get on blower to them tomorrow , suppose 4 grand for g4 and a good generator is still good . It's only a couple of half decent jobs and we will have made it back ! :RpS_biggrin:
 
Cfp said:
Cheers for that mate ! Really I want g4 3 phase min 20 m hose and genny ..
Click to expand...

i have a g4 light with 12.5kva genny and 20m hose in storage. was all serviced by the lord himself at pft northern. quite a few new parts. only used it for about 2-3 months. how much u looking to pay?
 
Last edited:
il have a word an try and figure out what its worth. its about 10 yrs old. but like i said got a full revamp off les about a yr back and has done less than 50 pallets since so all parts are pretty new and in good nick. feel free to make me an offer in the meantime if u want. ill try and get some pics to u if i can. southernmonkey on here has it in his lockup
 
Status
Not open for further replies.
Back
Top