Good Machine For Render-Thinking more pump as already have mixers

[bodders13]

Hi all, Was looking in to whether its worth getting or even possible to get a pump for render. Something suitable to use site mixed render rather than bagged. Have all the appropriate mixers for a good brew as hand apply it all, but wondered whether could just get machine can load the pre mix straight into? ANy ideas much appreciated.

 

[theclemo]

Lancy. @Plasterers1StopShop is your man I think.

 

[bodders13]

Forgot to say, I only do lime rendering. Hence the no bag renders. ALso use quite sharp sand so unsure if this affects whether can be pumped. Likewise whether your able to use machine if mix has hair or fibres in.

 

[theclemo]

The p.f.t boys will let u no all mate. Best of luck

 

[plasterjfe]

Forgot to say, I only do lime rendering. Hence the no bag renders. ALso use quite sharp sand so unsure if this affects whether can be pumped. Likewise whether your able to use machine if mix has hair or fibres in.

do you mean sand cement lime mixed render like 5:1:1 or lime rendering as in natural lime ?

 

[PFTwales]

PFT SWING L | pftplasteringmachines.com

thats a good machine for the job. Place it under the mixer

 

[Plasterers1StopShop]

Hi @bodders13, potentially the EZE 24 could be the best machine for you.

Before I confirm that, could you PM me your contact details so we can talk about your products in detail so I can advise the best machine for you

Ryan


I'm using The Plasterers Forum Mobile App

 

[bodders13]

do you mean sand cement lime mixed render like 5:1:1 or lime rendering as in natural lime ?

I Mean Natural Lime rendering. Hydraulic/Non Hydraulic depending on circumstances. Sometimes hair or fibre. Normally about 4mm down.

 

[plasterjfe]

then you need to speak with the two above posters matey

 

[bodders13]

I have spoke to PFT. Just waiting for a chance to get over there and trial one.