Hello from Sweden

Status
Not open for further replies.
S

sparcraft73

New Member
Dear Forum members,

I'm an enthusiastic DIY:er living in a house with cement lime-plaster external coating. The facade is ok but the base need to be re plastered and we also want to spray the house with new fine plaster in a different color.

I like machines and I've bought two plaster spraying machines. First I bought a PFT Swing II but this machine is to weak to do the base plaster. When this came clear to me I also bought a Tumac P15 which is a plaster machine with standard 90x270mm stator/rotor.

I'll start small and go bigger, completely new to this I may seem like an idiot but I think one can replace long experience with a hugh interest, practice and youtube.

I live in Gothenburg, Sweden and if you near here around and want to rent my machines, feel free to contatact me on Start.

Kindest regrads

Sparcraft73
 
Note to self: must remember to rent a machine next time im in Sweden..........................:RpS_unsure:

Welcome along marra.......................:RpS_thumbup:
 
Welcome, the reason I'm a plasterer here in Seattle , US is because my Grandfather was a plasterer in Sweden before the first world war.
 
Welcome along Sparcraft

Sweden is a great country... I have a swedish boss and have been over several times. Bit expensive though.....

Welcome to the forum buddy - have fun!
 
Loren said:
Welcome, the reason I'm a plasterer here in Seattle , US is because my Grandfather was a plasterer in Sweden before the first world war.
Click to expand...

GO HAWKS!!!!


be careful... Danny will be checking your forum history.... have you been on before selling NFL shirts....?

(had a lot of spam trying to sell NFL shirts some months back, if Danny finds out who it was they will be dead!!!)


By the way - good luck understanding all the sarcasm on here! PMSL
 
sparcraft73 said:
Dear Loren, thank you for you message and nice to here that you've got relatives from Sweden. Do you do plastering for living?
Click to expand...
I am a plasterer and I do it for a living. Three of my Grandparents were Swedish and one was German. When I was a little kid I remember going over to my Dads side and when my Grandmother would talk to me she would mix in lots of Swedish words. Some of the work I do ... https://www.lorensmedberg.com
 
Loren said:
I am a plasterer and I do it for a living. Three of my Grandparents were Swedish and one was German. When I was a little kid I remember going over to my Dads side and when my Grandmother would talk to me she would mix in lots of Swedish words. Some of the work I do ... https://www.lorensmedberg.com
Click to expand...

Hi Loren, I visited you web and I'm impressed. I looked into the section plaster moulding and think I'd like to try this! Is it gypsum you use or what kind of material do you use for producing the list?
 
sparcraft73 said:
Hi Loren, I visited you web and I'm impressed. I looked into the section plaster moulding and think I'd like to try this! Is it gypsum you use or what kind of material do you use for producing the list?
Click to expand...
The materials I used for doing the run work are 2 parts lime, 1 part casting plaster, and 1 part gauging plaster. Although instead of using the guaging plaster I would prefer to use Hydrocal, but I had the Gauging plaster in the shop and I didn't want to buy a sack of Hydrocal and have it sitting around until the next run job comes along. Here's my supplier in Seattle. It's kind of interesting seeing the different materials we all use. Plaster & Stucco USG Industrial Casting Plaster | Salmon Bay Sand & Gravel « Salmon Bay Sand and Gravel
 
Status
Not open for further replies.

Share this page

Back
Top