Hopper and Compressor for thin coat

[Andy M]

As above ,anyone use these for 1.5 thin coat or are they not suitable cheers.

 

[Groove37]

U got lab

 

[Andy M]

Yes pal

 

[Dansouthcoast84]

ive just started using ritmo for 1.5mm still trying to get it less tyroleany. used a hopper and compressor for smaller areas.

 

[Arti]

I've done loads with a pft compressor and hopper but using the ritmo like Dan for bigger jobs

 

[Rossi46]

I use a hopper and compressor sometimes. I don’t mind the speed. I’m in no rush anyway.

 

[Rigsby]

I have used it for both sprayed on texture and for applying to be rubbed up.

 

[Andy M]

I have a ritmo what would I need to add on a thin coat set up?

 

[Vincey]

Think it’s this one andy but someone correct me if I’m wrong, I been looking on Wales site for the same set up as you this week tbf his site is quite easy to flick through for stuff , not sure if I’d have to change to a different rs too though for my Ritmo M

Short spraying gun Texturing and Primers

Long texturing spray gun Short plastering gun for texturing and primers 200 mm long spraying gun. Screw on nozzles 10mm. Various size nozzles available Material shut off on tube Air on/off switch Suitable to spray silicone and acrylic textures. Suitable for tyrolean & render primers with grit...

www.pftplasteringmachines.com

 

[Andy M]

Think it’s this one andy but someone correct me if I’m wrong, I been looking on Wales site for the same set up as you this week tbf his site is quite easy to flick through for stuff , not sure if I’d have to change to a different rs too though for my Ritmo M

Short spraying gun Texturing and Primers

Long texturing spray gun Short plastering gun for texturing and primers 200 mm long spraying gun. Screw on nozzles 10mm. Various size nozzles available Material shut off on tube Air on/off switch Suitable to spray silicone and acrylic textures. Suitable for tyrolean & render primers with grit...

www.pftplasteringmachines.com

Cool,does it need a different hose As well.Apologies,don't do tons of thin coat but got a job with good areas and minimal maskng but dont like handballing the s**t.

 

[Vincey]

Cool,does it need a different hose As well.Apologies,don't do tons of thin coat but got a job with good areas and minimal maskng but dont like handballing the s**t.

Not sure myself mate but the others on this thread will put us right

 

[Arti]

Same hose but you need a remote cable and a separate compressor

 

[lurpak]

Because all ways say i do it ok ,he's taking me for a c**t so i do the same I'll , I said to hi.m 290 ,then he said to me 150

 

[Andy M]

Because all ways say i do it ok ,he's taking me for a c**t so i do the same I'll , I said to hi.m 290 ,then he said to me 150

WTF

 

[lurpak]

WTF

c**t