Kitchens cut boards first on opposites, rest mix up first. Unless there’s loads of sockets or pipes. Don’t do solid around the edge either unless it’s spec for suction test. 4 rows of 7 per board except skirt line that gets 5. Extra round sockets and solid over gas pipes.Right then lads n lasses. Who cuts a load of boards then sticks them on and who mixes up and sticks as you go ?
Kitchens cut boards first on opposites, rest mix up first. Unless there’s loads of sockets or pipes. Don’t do solid around the edge either unless it’s spec for suction test. 4 rows of 7 per board except skirt line that gets 5. Extra round sockets and solid over gas pipes.
[/QUOTE I’ve been trying cutting around 10 boards and leaving them in situ with a nail in .then mixing 3 bags sticking them on and using what’s left for reveals . Any more tips ?
I do a lot of conny roofs bet these are great for angles .Invest in a couple of these. 200mm and 500mm, god send for what I do. View attachment 33582
I do a lot of high end kitchens so they’re mint for that.I do a lot of conny roofs bet these are great for angles .
Cut a good few and mix up.Six by four is twenty four behind each 8by4 slab.I know lads that only put 12 behind each slab.I have to say in the last year or say that sand and cement is making a huge comeback.And about time.Right then lads n lasses. Who cuts a load of boards then sticks them on and who mixes up and sticks as you go ?
Plumber tapes all his pipes up that are touching cement then yellow gas on the gas pipe. Supposed to do it solid so the if it’s drilled through it comes out the hole and not fill the void.Depends on size of job. But never dot over gas pipes thought this was bad.
@Topspread16 I.m guessing all your gas pipes get taped up
Invest in a couple of these. 200mm and 500mm, god send for what I do. View attachment 33582
Solid as in like this?Plumber tapes all his pipes up that are touching cement then yellow gas on the gas pipe. Supposed to do it solid so the if it’s drilled through it comes out the hole and not fill the void.
I’ve recently bought the 500mm one. They are quite good. Couldn’t get a new Japanese Shinwa 600mm. as nowhere has stock.Invest in a couple of these. 200mm and 500mm, god send for what I do. View attachment 33582
IdiotSlap em and smack em. Job done.