Internal render..

[SpankySouthport]

Anyone ever S&C scratch coated then hard walled then topped it off with a S&C finish coat?

 

[CTPlastering]

Why would you need to :-s

 

[SpankySouthport]

Because if I used S&C it would need another 2 coats then topcoat

 

[S a plastering]

huh!!!!!!!!!

 

[s.p.t plastering]

Putting sand and cement on a gypsum plaster is a no no, i always thought???

 

[joet]

why not a 2 coat s&c finished with multi?

 

[kebab king]

Putting s&c on Gypsum is a no no, the other way round works ok.

 

[Jace]

you could do the hardwall on the s/c but not the s/c on the hardwall just do it all in s/c you pussy haha

 

[SpankySouthport]

you could do the hardwall on the s/c but not the s/c on the hardwall just do it all in s/c you pussy haha

Haha I would have done but it need another 2 coats so would be 4 in total! Might get frost proofer!

Is there any accelerants out there that anyone would recommend?

if I did it as is it would take an age! Not enough wages on it! Clearly fcked up on the price as I underestimated just how much padding out it needed! Gone through 2 tonne of Sand on 70m2!!

pissin me off big time

so it 100% no no S&C over hardwall? Even if it has deep key and maybe a slurry??

 

[raggles]

Haha I would have done but it need another 2 coats so would be 4 in total! Might get frost proofer!

Is there any accelerants out there that anyone would recommend?

if I did it as is it would take an age! Not enough wages on it! Clearly fcked up on the price as I underestimated just how much padding out it needed! Gone through 2 tonne of Sand on 70m2!!

pissin me off big time

so it 100% no no S&C over hardwall? Even if it has deep key and maybe a slurry??

Your right 100% no

 

[SpankySouthport]

Your right 100% no

Lol owww wish someone would just tell me what I want to hear kind of like I do to the misses:RpS_thumbsup:

 

[johniosaif]

Stupid as it seems above, sorry, I was asked to price work in a new school extension, spec was as follows, scratch coat of sand and cement, dot and dab insulated board, fix mesh on to board, then hardwall and skim. I priced but alas I was not the chosen one.

 

[SpankySouthport]

Stupid as it seems above, sorry, I was asked to price work in a new school extension, spec was as follows, scratch coat of sand and cement, dot and dab insulated board, fix mesh on to board, then hardwall and skim. I priced but alas I was not the chosen one.

Insulated backed board dabbed?? Wtf?

 

[bubbles65]

The most frightening thread I've read on here for some time :-( ................fu kin hell

 

[flynnyman]

LOL tell him you will be back in 8 weeks to pick it off the floor Whichever way you go i recon

 

[Arti]

im sure asif can cut & paste an answer from somewhere.............:RpS_thumbup:

 

[bubbles65]

https://s1042.photobucket.com/user/bigal4444/media/imgres_zpsed9b88b3.jpg.html

 

[raggles]

https://s1042.photobucket.com/user/bigal4444/media/imgres_zpsed9b88b3.jpg.html

Had one of them the day but with a flake in it yum yum:RpS_thumbup:
But your right they could be great for dubbing out :RpS_crying:

 

[essexandy]

Still on the bright side real or not Marshall don't seem so stupid now. Well done Spanky.

 

[raggles]

:RpS_laugh:

 

[CTPlastering]

U can dot and dab insulation boards just not silver backed ones as been said on here , well my dad said he done it but but been told it was fine . . . . . .

 

[CTPlastering]

That was for asifs post not the main one . . . . For the main ost just packer out with dot and dab and fukin stick boards on , if water roof needed scratch with proofer included the. Dab , unless they don't want dab . . . . . Anyways last day in fuetaventura for me :-( hope u's have been graftin hard as am havin a nice cocktail chillin at the beach chaps , **** loads rendi g ova here goin on here luks shite most of it cowboys in the heat

 

[smudge505]

The S/C render was probably just being used as a parge coat, to minimise air leakage, then obivously the Thermal board has been speced to meet the U- value required on the construction, and I guess the idea of the 2 coat on top of the mesh is to give impact resistance to the wall, seems a lot of work.