Is this normal?

[Needsomehelp]

Hi,

Is this normal? (Assume not) any idea what the issue is, if its not supposed to be like this?

It has fully dried everywhere.

The metal corner bead edge is on show on all reveals. I dont want to question the guys work if this is how it should be, so am asking for advise first.

Cheers

 

[Cockney]

Not normal.
Was the beads left outside.

 

[essexandy]

Some times the beads come from the manufacturer with a very light oil on them that can cause this discoloration, it's more common than most people realise. I've never known it to be a problem at the decoration stage.
I'd personally be more concerned with that scrim grinning through on the bead arris. Be one of those loons who puts scrim down every bead most likely?

 

[alijhan]

the corner bead edge shouldn't be exposed if it's finished correctly; it should be covered by plaster for a smooth look. Might be worth checking with a pro to confirm, but it doesn’t sound normal.

 

[JessThePlasterer]

Some times the beads come from the manufacturer with a very light oil on them that can cause this discoloration, it's more common than most people realise. I've never known it to be a problem at the decoration stage.
I'd personally be more concerned with that scrim grinning through on the bead arris. Be one of those loons who puts scrim down every bead most likely?

Oh dear lord……. I was just about to reply the same. We’re in agreement….. I need to go sit down

 

[paulf]

Oh dear lord……. I was just about to reply the same. We’re in agreement….. I need to go sit down

That's uncanny or you've bugged his gaff with one your crimbo potatoes.

 

[Needsomehelp]

Thanks for replies.....so it is ok to decorate? or should i get the guy to come back and have a look. sorry if being thick just want to make sure before cracking on.

 

[Needsomehelp]

Not normal.
Was the beads left outside.

dont think so. i was away when they did the job - just got back and seen how it is.

 

[dustydave]

Some times the beads come from the manufacturer with a very light oil on them that can cause this discoloration, it's more common than most people realise. I've never known it to be a problem at the decoration stage.
I'd personally be more concerned with that scrim grinning through on the bead arris. Be one of those loons who puts scrim down every bead most likely?

Mist coat with dulux trade supermatt and this usually covers bead.

 

[Cockney]

Some times the beads come from the manufacturer with a very light oil on them that can cause this discoloration, it's more common than most people realise. I've never known it to be a problem at the decoration stage.
I'd personally be more concerned with that scrim grinning through on the bead arris. Be one of those loons who puts scrim down every bead most likely?

 

[essexandy]

Thanks for replies.....so it is ok to decorate? or should i get the guy to come back and have a look. sorry if being thick just want to make sure before cracking on.

It's up to you whether you sort out the scrim sticking out or get moosh back to sort it. You definitely can't decorate straight over it.

 

[Spitandpolish]

It's up to you whether you sort out the scrim sticking out or get moosh back to sort it. You definitely can't decorate straight over it.

Bloody mess alright !

 

[Flotsam&Gypsum]

Be one of those loons who puts tapit tape down every bead most likely?

Your probly right.

 

[essexandy]

Oh dear lord……. I was just about to reply the same. We’re in agreement….. I need to go sit down

Ok I've finally gotten over the shock. @JessThePlasterer shut up.

 

[paulf]

Ok I've finally gotten over the shock. @JessThePlasterer shut up.

You should still take it easy, a shock like that can take weeks to get over.

 

[essexandy]

You should still take it easy, a shock like that can take weeks to get over.

I think the evil bitch said it out of spite mate. It's not like she had the knowledge to come up with the same answer as me.

 

[paulf]

I think the evil bitch said it out of spite mate. It's not like she had the knowledge to come up with the same answer as me.

 

[essexandy]

View attachment 80378

That's exactly what she's like.
Sneaky, sneaky bitch.

 

[KingCharlesTheTurd]

the corner bead edge shouldn't be exposed if it's finished correctly; it should be covered by plaster for a smooth look. Might be worth checking with a pro to confirm, but it doesn’t sound normal.

dafuq u talking about?
fk off back to France on yer rubber boat