Johnstones render

B

bprenderingservicesltd

Active Member
Hi
Has anyone sprayed Johnstones basecoat,I'm thinking about using it on my next job,I've used it before hand applied and found it nice gear and texture was spot on.im going onto brickwork and the tech data says 6mm seems thin is this right?also can anyone remember water setting for it through a ritmo
Cheers dave
 
bprenderingservicesltd said:
Hi
Has anyone sprayed Johnstones basecoat,I'm thinking about using it on my next job,I've used it before hand applied and found it nice gear and texture was spot on.im going onto brickwork and the tech data says 6mm seems thin is this right?also can anyone remember water setting for it through a ritmo
Cheers dave
Click to expand...
Been ages since we sprayed it. About 220 I think. You want at least 10mm on brickwork spray in 2 passes. Use there key coat primer on old brickwork it's just like rendaid to spray or spread. Hope this helps
 
Iv sprayed it with my k4. Went through really nice then they tried to charge me double what the rep said it costs. So Iv never used it again.


Sent from my iPhone using Tapatalk
 
Jim85 said:
Iv sprayed it with my k4. Went through really nice then they tried to charge me double what the rep said it costs. So Iv never used it again.


Sent from my iPhone using Tapatalk
Click to expand...
What was the cost?
 
The rep said a tenna a meter render only. They tried it on at 20 a meter then it ended up being around 13-14 after I argued it. Soooooo I don't care how good it is. I int using it


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top