K rend accelerant

[Demon]

can anyone tell me if I can use krend accelerant in my ritmo l

 

[themucky1]

I'd think so mate but it goes in the water butt not your machine

 

[Demon]

I'd think so mate but it goes in the water butt not your machine

Cheers pal

 

[keithuk]

I use a bit

 

[Demon]

I use a bit View attachment 9112

Is that wickes rapid hardener can that also go through the machine

 

[Vincey]

I use a bit View attachment 9112

You still not cleared out the van.

 

[keithuk]

You still not cleared out the van.

old picture ,sorry !lol

 

[keithuk]

Is that wickes rapid hardener can that also go through the machine

I put it through my G4 mate ,never had any worries

 

[MikeAtthis]

Is that wickes rapid hardener can that also go through the machine

i've put gallons of the stuff through my ritmo as well no problems

 

[Demon]

i've put gallons of the stuff through my ritmo as well no problems

What's the best way to gauge it when putting it in the barrel the krend one says 100 mm per bag

 

[keithuk]

Depends how strong you want it ,how cold it is and what back ground mate ,as a rule of thumb 5lts per 220 water butt ,tbh i am using 10lts now as its a bit colder

 

[zolco]

Depends how strong you want it ,how cold it is and what back ground mate ,as a rule of thumb 5lts per 220 water butt ,tbh i am using 10lts now as its a bit colder

That would mess up my pump I reckon
Link Removed

 

[keithuk]

That would mess up my pump I reckon
Link Removed

So you finally got a pump mate ,think we might need to talk ,not sure if you have been given the right advice there

 

[themucky1]

Is that better than a ritmo?

 

[zolco]

So you finally got a pump mate ,think we might need to talk ,not sure if you have been given the right advice there

I'm over the moon, can't wait to use it on site tomorrow!

 

[Demon]

Depends how strong you want it ,how cold it is and what back ground mate ,as a rule of thumb 5lts per 220 water butt ,tbh i am using 10lts now as its a bit colder

Thanks pal I will give it ago machines still very new still getting to grips it still
Just a bit nervous about it stating to go off in the machine or the hose unsure how long it speeds curing time to I've got 30 bags k1 to put on tomo

 

[keithuk]

Thanks pal I will give it ago machines still very new still getting to grips it still
Just a bit nervous about it stating to go off in the machine or the hose unsure how long it speeds curing time to I've got 30 bags k1 to put on tomo

@MikeAtthis has the same machine as you

 

[User___removed]

Thanks pal I will give it ago machines still very new still getting to grips it still
Just a bit nervous about it stating to go off in the machine or the hose unsure how long it speeds curing time to I've got 30 bags k1 to put on tomo

I have a ritmo L.had it 3 years now
After a while you will be able to set it up with your eyes closed.its a great little machine.

 

[MikeAtthis]

What's the best way to gauge it when putting it in the barrel the krend one says 100 mm per bag

2 tubs a butt this time of year

 

[MikeAtthis]

h

Thanks pal I will give it ago machines still very new still getting to grips it still
Just a bit nervous about it stating to go off in the machine or the hose unsure how long it speeds curing time to I've got 30 bags k1 to put on tomo

20 minutes no problems

 

[User___removed]

h

20 minutes no problems

Takes me 18.x

 

[User___removed]

can anyone tell me if I can use krend accelerant in my ritmo l

Who did you buy the ritmo from demon?

 

[UKPlasteringmachines]

You'll do well to get a same day on krend now, we tries just before Xmas and it was a bit milder and we literally got it done by the skin of our teeth .... And we put s**t loads of accelerator in

 

[Demon]

Who did you buy the ritmo from demon?

Les at pft northern great fella lots of help

 

[UKPlasteringmachines]

f**k all that ... What's the puppy in the picture

 

[Marshy]

At a guess a Mastiff of some description Neopolitan??

 

[UKPlasteringmachines]

I F*****g love puppies

 

[Demon]

f**k all that ... What's the puppy in the picture

That's me new British bull dog very proud

 

[UKPlasteringmachines]

I thought it was a bulldog .... I love them, I got a Boxer


Sent from my iPhone using Tapatalk

 

[user_removed]

Wouldn't bother with an accelerator now, as said just bang it on mid afternoon finish for 4 should be bang on for 8am next morning.

Tip for you demon don't spray k1 too stiff, it's very coarse aggregate and will eat your r&s as what happened to us.

 

[Demon]

I thought it was a bulldog .... I love them, I got a Boxer


Sent from my iPhone using Tapatalk

 

[Demon]

Cheers everyone for all your help