User___removed
Well-Known Member
Used this today for the first time.nice to spray although it doesn't half pick up quick!!
Only scratch coated with it mind.
130 bags through the ritmo
Only scratch coated with it mind.
130 bags through the ritmo
No it's a different product although very similarIs this cpi then Bobby
Ideal.using the Refina power sponge on itIt's nice to rub up aswell bobby just like OCR
No it's a different product although very similar
Wouldn't want to use it when it's hot mind as it picks up very wuick
ive only used the sponge.you can get on it when it's fairly wet so acts like a float really.Good for winter then [emoji106]
I'm gonna get one of them Refina power sponge things, do you just use the sponge or plastic blade too mate cheers
I've only u
ive only used the sponge.you can get on it when it's fairly wet so acts like a float really.
I had my resivations about it but after a few days it's a great bit of kit
I've only u
ive only used the sponge.you can get on it when it's fairly wet so acts like a float really.
I had my resivations about it but after a few days it's a great bit of kit
Like u would without the power sponge!Would love to see the process and finish with that beast.
Question.
How u rub up reveals and small areas you cant get the power sponge in?
I use a float for reveals and small area'sWould love to see the process and finish with that beast.
Question.
How u rub up reveals and small areas you cant get the power sponge in?
Have a small Job to do with this gp mortar will be going over spar scratch then top a Week later, was thinking of adding waterproofer In my butt for the scratch has anyone ever done this with decent results ?I use a float for reveals and small area's
Yes it does pick up quick.its just like CPI render but with less waterproof
So I've been doing the finish coat over the past few days and I've got to say I'm not a massive fan of this
It's very like k rend gear,course and a little dead compaired to say weber OCR.
I tried to use the power sponge although ended up using a float which came out ok to be honest
It's far to gritty for me and looks a bit like nhl3.5 lime finish.
Ok really but not sure I'll be rushing back to use it again
YesIs that the disc for the power sponge Rory?
What r@s u using. I might have to spray 30 bags of it next week. I found a D4. 3 clamp stator in back of the shed didn't know it was there. It's was never used. Can anyone tell me the blots on top are lose do I have to Titan them up.
It's a clampable R/S with the clamp pre fitted. Start them off loose and then tighten over time.
Don't over tighten as you won't et the maximum efficiency from it.
Worth pressure testing also to see if you need to tighten it at all.
Any questions, give me a call mate
@Plasterers1StopShopRyan do you stock d4.3 ?
What you spraying to slow it down ?only out of interestRyan do you stock d4.3 ?
Ryan do you stock d4.3 ?
Most PFT dealer do ,just make sure its the real thing
So I've been doing the finish coat over the past few days and I've got to say I'm not a massive fan of this
It's very like k rend gear,course and a little dead compaired to say weber OCR.
I tried to use the power sponge although ended up using a float which came out ok to be honest
It's far to gritty for me and looks a bit like nhl3.5 lime finish.
Ok really but not sure I'll be rushing back to use it again
This will slow the speed of the spray ? This is what I'm looking for as doing a few domestics and awkward bits to spray round .So do most M-tec dealers. Also EZE Range dealers as its a popular R/S made by various manufacturers
This will slow the speed of the spray ? This is what I'm looking for as doing a few domestics and awkward bits to spray round .
It will indeed mate
For base coats, and I'm teaching another lad to spray just think with it slowed down he can get his ribbons neater and he take a bit more time .What you spraying to slow it down ?only out of interest