K rend over painted rubbed up s&c

[markky]

Hello chaps.
It’s probably already on here somewhere.
K rending a house. Most of it it is face brickwork and so far no prob with the job. Good finish punter well happy.
The rear of the house has a 1 storey extension that is painted s&c.
Can we prime it with the k rend r10 primer then scratch and bead it then top it late afternoon for scratching up next morning as we have with the rest of the job
We are using the k1 silicone k rend
2 coats same day then scratch back following morning. If not......
any ideas ?
Thanks in advance.
Markky

 

[Danny]

Bump

 

[Spray]

Hello chaps.
It’s probably already on here somewhere.
K rending a house. Most of it it is face brickwork and so far no prob with the job. Good finish punter well happy.
The rear of the house has a 1 storey extension that is painted s&c.
Can we prime it with the k rend r10 primer then scratch and bead it then top it late afternoon for scratching up next morning as we have with the rest of the job
We are using the k1 silicone k rend
2 coats same day then scratch back following morning. If not......
any ideas ?
Thanks in advance.
Markky

Anwser is no ! Not over paint

 

[markky]

Anwser is no ! Not over paint

Ok. What would the answer be. Scarifying (spelling) the paint off ?
Or is there something else we could do

 

[Andy M]

Do know if Krend do a product but Parex make Parinter which is a key coat over sound paint.

 

[markky]

Do know if Krend do a product but Parex make Parinter which is a key coat over sound paint.

Ok thanks mate. I will prob give k rend a ring speak to their technical mob.
Not doing it for a week yet so plenty of time

 

[Spray]

Anwser is no ! Not over paint

K rend don’t have a spec for over paint !
Parex have one but paint needs to be solid and not oil based

 

[Renov8j]

Just do it that hp12 sticks like s**t! f**k the speck if we all went by the book we would be f**k*d! Needle gun to take off loose prime n off ya go get some mesh in there ya laughing, don't listen to all these mono site bashers they been taught to be compliant to regs

 

[Spray]

Just do it that hp12 sticks like st! fk the speck if we all went by the book we would be f*kd! Needle gun to take off loose prime n off ya go get some mesh in there ya laughing, don't listen to all these mono site bashers they been taught to be compliant to regs

Mesh will solve your issues
Don’t listen to the mono lads who spray it everyday ?

 

[Renov8j]

Mesh will solve your issues
Don’t listen to the mono lads who spray it everyday ?

Nothing will solve my issues, knew I'd get ya biting

 

[Spray]

Nothing will solve my issues, knew I'd get ya biting

Who’s biting ?

 

[Spray]

Nothing will solve my issues, knew I'd get ya biting

You reply to this and not your racist post

 

[Deleted member 32554]

B

 

[Spray]

B

Abc

 

[dieselpower]

Ok thanks mate. I will prob give k rend a ring speak to their technical mob.
Not doing it for a week yet so plenty of time

@krend aye Good luck trying to get a sensible answer out of these clowns, or even an answer.

 

[Deleted member 32554]

@krend aye Good luck trying to get a sensible answer out of these clowns, or even an answer.

We were bumping the post to the top mate ,

 

[Danny]

@K Rend

 

[spunky]

Krend is shite.

 

[markky]

Well I phoned and the lady at k tend said the weight of the k tend would pull the paint off
She said to mesh it and mechanically fix the mesh ‍