Krend gp mortar

[HLR External Renders]

Is this stuff better uses as a multi coat on different days or can it be used as a ocr 2 pass ??

 

[Djr]

I've used it loads of times in 2 passes it great gear imo

 

[Danny]

@K Rend

 

[owls]

@K Rend

 

[HLR External Renders]

Was told today it cracks more than Weber ocr any one ever get any cracks/splits ?

 

[tyzak]

Used to provide a scratch coat to give an even suction over masonary backgrounds .
Cheaper than standard UF base coat .

Not designed to give a rendered finish or to primer and texture

 

[Arti]

@K Rend

your persistent al give you that Daniel son

 

[Djr]

It's bang on for external plain face finish done correctly. No difference in it and ocr .both great products

 

[craigEEE]

I was speaking to a supplier today who says he's getting brilliant reviews on this stuff, I have a job about 60m so I'm going to give it a go.

It's knock off and re render so will sbr be OK then 2 pass K-mix?

 

[Djr]

Sbr is a product I never use with bagged render. If the block work is shot dub it out quick Darby here and there top it rub it bang on finish
Done loads of it as I said before great product

 

[craigEEE]

Getting this on tomorrow, what's the drying times like on it, 1st pass, net, straight on with 2nd pass?

 

[Marshy]

Getting this on tomorrow, what's the drying times like on it, 1st pass, net, straight on with 2nd pass?

Net?? Are you fishing pal?? Or maybe a stocking wearer lol (it's ok pal they all fishnet down here)

 

[craigEEE]

Net?? Are you fishing pal?? Or maybe a stocking wearer lol (it's ok pal they all fishnet down here)

Mesh, scrim, whatever you want to call it

 

[Marshy]

Mesh, scrim, whatever you want to call it

Was only messing pal. I call it fishnetting as it gets me aroused

 

[HLR External Renders]

Sprayed 3 pallets last week popped back today no cracks/splits anywhere, we 2 passed took a wile to pick up before we could I bar it we finished it with power float and finally jumbo car sponge I found it was nice to rub up more forgiving than Webbers ocr which I find once she's on her way there's no bringing the bitch back, gp finished nice tho found it likes to sag if on to thick next time if and when I use it again il deffo scratch the lot fist then when cured top coat nice and wet pass about 8 / 10 mm it reminds me of a shite sand and cement mix with no Feb

 

[craigEEE]

Sprayed 3 pallets last week popped back today no cracks/splits anywhere, we 2 passed took a wile to pick up before we could I bar it we finished it with power float and finally jumbo car sponge I found it was nice to rub up more forgiving than Webbers ocr which I find once she's on her way there's no bringing the bitch back, gp finished nice tho found it likes to sag if on to thick next time if and when I use it again il deffo scratch the lot fist then when cured top coat nice and wet pass about 8 / 10 mm it reminds me of a shite sand and cement mix with no Feb

We did a 80% of the panels with a scratch, the few we didn't scratch didn't rub up too well, if I did it again unless onto new block I'd scratch and mesh 1st, does rub up well