lime.green duro

[Dansouthcoast84]

has anyone sprayed duro or forte from l*m*-g***n
?

water settings on ritmo L?

 

[Mag]

I think that’s a no

 

[Dansouthcoast84]

I think that’s a no

lol looks like it

 

[Danny]

@Vincey

 

[Vincey]

Yes mate used it in summer was lovely materials, I hand applied though, I phoned there hq the guy said can be sprayed and seen a video of a guy spraying it looked lovely too will try find the video link

 

[Vincey]

Phone them mate I found them helpful even could ask the guys number who sprayed this place at the house of the northern gate in dunnet

 

[Tinytom]

Iv hand applied it this year, nice gear

 

[zombie]

I was asked to price a massive job this year using this but couldnt find any lads with experience of product so didnt bother.

I'm sure it was going to be used on boards on a ceiling aswell but it was huge was a 100m+ lid to put on with it off scaffold aswell so bottled it.

Be interested to know but more about it.

 

[Dansouthcoast84]

thanks lads.
got 8mm on front to lay with natural finish topcoat.

and on rear and side 20mm forte with tredirend topcoat

 

[zombie]

thanks lads.
got 8mm on front to lay with natural finish topcoat.

and on rear and side 20mm forte with tredirend topcoatView attachment 42280

Love those roofs

 

[martinemj]

Nice place...

I've sprayed lots of the natural finish onto NHL base coat....it's only a thin finish coat

Only 20kg bag though and bloody expensive for what it is....

 

[Dansouthcoast84]

Nice place...

I've sprayed lots of the natural finish onto NHL base coat....it's only a thin finish coat

Only 20kg bag though and bloody expensive for what it is....

you sprayed the finish? i was gunna hand ball that at 4mm then sponge? does it pick up quick?

 

[Dansouthcoast84]

Love those roofs

so.do.i but the open eaves are gunna do me in!

 

[Lastlaff]

Look quite new the thatch as it’s still yellow in places?

 

[Tinytom]

thanks lads.
got 8mm on front to lay with natural finish topcoat.

and on rear and side 20mm forte with tredirend topcoatView attachment 42280

You get some right jobs!

 

[Tinytom]

NHL and grit sand base L green top coat (not sure why it gets blanked out when you type l*m*-g***n here)

 

[Dansouthcoast84]

You get some right jobs!

do pull some.shite in mate...

 

[martinemj]

you sprayed the finish? i was gunna hand ball that at 4mm then sponge? does it pick up quick?

Sprays fine ...
Yes on NHL we did wet wall first (was summer though )
This time of year may not need to

 

[markla]

you sprayed the finish? i was gunna hand ball that at 4mm then sponge? does it pick up quick?

on those blocks its going to suck right in i did some over old brick 12m2 i gave the wall a good drink and for the top coat.

 

[Dansouthcoast84]

on those blocks its going to suck right in i did some over old brick 12m2 i gave the wall a good drink and for the top coat.

cheers mate.

 

[Dansouthcoast84]

Sprays fine ...
Yes on NHL we did wet wall first (was summer though )
This time of year may not need to

what did.you use to spray the natural finish? what thickness you apply?

 

[martinemj]

Machine wise..... I've got an old s48 putzknecht(3 phase,similar type.as m300)
Built like a tank
Sprayed on at about About 6 - 7mm max


We now just use at astier intercromex base coat and finish of mono st astier (lime render )

We can put on bit thicker which helps with older property being pizzed

I would just test a smaller area to get a feel for how quick it's going to pull in ...

 

[Dansouthcoast84]

Machine wise..... I've got an old s48 putzknecht(3 phase,similar type.as m300)
Built like a tank
Sprayed on at about About 6 - 7mm max


We now just use at astier intercromex base coat and finish of mono st astier (lime render )

We can put on bit thicker which helps with older property being pizzed

I would just test a smaller area to get a feel for how quick it's going to pull in ...

i got the ritmo.l

 

[martinemj]

We will be looking to change for a 240 or 110v machine next year....
something easier to move around
Ritmo is a fine machine..

 

[Ftp321]

has anyone sprayed duro or forte from l*m*-g***n
?

water settings on ritmo L?

Did you work the ritmo settings out @Dansouthcoast84
And how did you get on
I've got 240m chapel to do in Duro and natural finish a week on Monday
In the same situation it will be going through a ritmo any advice mate

 

[martinemj]

Hope weather improves by then for that

 

[Ftp321]

Hope weather improves by then for that

Hack off first then might have to hold off for a bit

 

[Dansouthcoast84]

Did you work the ritmo settings out @Dansouthcoast84
And how did you get on
I've got 240m chapel to do in Duro and natural finish a week on Monday
In the same situation it will be going through a ritmo any advice mate

i didnt bother ritmo... hand applied instead as open eaves and thatched roof. more hassle than worth

 

[Ftp321]

i didnt bother ritmo... hand applied instead as open eaves and thatched roof. more hassle than worthView attachment 44763View attachment 44763View attachment 44764View attachment 44764

Nice job Dan
How did you find the l*m*-g***n gear

 

[Dansouthcoast84]

Nice job Dan
How did you find the l*m*-g***n gear

basecoats were fine... id compare it to hpx?

topcoat wise like putting krend up. found it hard to rub. but luckily they wanted a look of age so wanted few marks few swirls few bold over sponged areas.

may have to be a thicker coat to get a neat sponged finish

 

[Ftp321]

basecoats were fine... id compare it to hpx?

topcoat wise like putting krend up. found it hard to rub. but luckily they wanted a look of age so wanted few marks few swirls few bold over sponged areas.

may have to be a thicker coat to get a neat sponged finish

Cheers Dan

 

[martinemj]

Nice one Dan ...
Looks like what the finish Is made for...

 

[tapit]

Nice one Dan ...
Looks like what the finish Is made for...

 

[essexandy]

Love those roofs

So did I until I bought one

 

[John j]

I was asked to price a massive job this year using this but couldnt find any lads with experience of product so didnt bother.

I'm sure it was going to be used on boards on a ceiling aswell but it was huge was a 100m+ lid to put on with it off scaffold aswell so bottled it.

Be interested to know but more about it.

Shoukd of asked mate