Little job i completred recently

[Marshy]

My first attempt with production and fixing fibrous cornice after getting Mike's tips and but nothing compared to his great works but will get there in near future!

If I were @mikeadams1985 I'd step up my security at home and CCTV installed and tell the local police of a potential stalker alert!?

 

[gooner59]

Loverly craftsmanship mate , clever

 

[mikeadams1985]

https://static.rcgroups.net/forums/...-217-DOUBLE-FACEPALM-600x480.jpg?d=1306873439

 

[mikeadams1985]

https://static.rcgroups.net/for...217-DOUBLE-FACEPALM-600x480.jpg?d=1306873439

 

[mikeadams1985]

Oh ffs

 

[Marshy]

https://static.rcgroups.net/forums/...-217-DOUBLE-FACEPALM-600x480.jpg?d=1306873439

:RpS_lol:

 

[Jace]

Agree with Mike as they went bit too far!

of course you do

 

[superspread]

If I were @mikeadams1985 I'd step up my security at home and CCTV installed and tell the local police of a potential stalker alert!?

:RpS_lol:

 

[superspread]

If I were @mikeadams1985 I'd step up my security at home and CCTV installed and tell the local police of a potential stalker alert!?

If I was mikes wife I'd be looking over my shoulder, hope mike hasn't got a rabbit:RpS_laugh:

 

[Arti]

a rabbit for his ass...................:RpS_unsure:

 

[Marshy]

If I was mikes wife I'd be looking over my shoulder, hope mike hasn't got a rabbit:RpS_laugh:

 

[superspread]

:RpS_lol: Your da man marshy

 

[superspread]

a rabbit for his ass...................:RpS_unsure:

Yea that as well:RpS_laugh:

 

[Marshy]

:RpS_lol: Your da man marshy

Cheers buddy, don't think Ryan likes his pic tho ?? :RpS_laugh:

 

[superspread]

Cheers buddy, don't think Ryan likes his pic tho ?? :RpS_laugh:

Ryan's got to be on the wind up .. Surely:RpS_w00t:

 

[Marshy]

Ryan's got to be on the wind up .. Surely:RpS_w00t:

I just think he's met his idol and good on him, to be fair to him he gets a lot of stick but takes it :RpS_thumbup:

 

[beddy]

Just wrote to companies house asking them to dissolve my company. When asked why. I just showed them this pic and said I couldn't Compete so no point

At least you're honest mike

 

[superspread]

I just think he's met his idol and good on him, to be fair to him he gets a lot of stick but takes it :RpS_thumbup:

yea he s not a bad lad

 

[mikeadams1985]

Bah it's all harmless banter.
my security systems a dog.
Better than any alarm. .

 

[Arti]

I just think he's met his idol and good on him, to be fair to him he gets a lot of stick but takes it :RpS_thumbup:

up the ass....................:RpS_thumbup:

 

[Marshy]

up the ass....................:RpS_thumbup:

:RpS_lol:

 

[puddove]

marvellous job, its good to see other plasterers taking an interest in the fibrous side to plastering, did you use silicon cold pour for the enrichment, if so, thixotropic or free flow

 

[mikeadams1985]

Silicone cold pour and free flow on it, now neex for thixotropic, i only use that when doing in-situ silicone mould making or skin moulds

 

[mikeadams1985]

What silicone and what method you use completely depends on what your doing tbh Ryan. Experience will teach that

 

[cooptaza]

Jesus Ryan you sound like an Oscar winners acceptance speech ! :-0

Spartacus

 

[mikeadams1985]

Free flow. Just means you build a frame aroubd the enrichment and pour away. Letting it freely flow around the enrichment and cover it.

YouTube smooth on and watch there videos they have a few decent ones on there.

Vinamold is free flow poured as it's just hot rubber melted down. Tbh it's ****.

 

[puddove]

yes what kind of fibrous subjects are you wanting to know about

 

[Marshy]

yes what kind of fibrous subjects are you wanting to know about

If your asking Ryan you really don't realise what your letting yourself in for lol :RpS_laugh: :RpS_thumbup:



He's a good lad really :RpS_thumbsup:

 

[topstrop1]

Other term is open pour Ryan as opposed to closed pour in a supporting case

 

[puddove]

is there a college near you that covers fibrous level 3 - have you enquired

 

[puddove]

is he that bad - lol :RpS_laugh:

 

[zombie]

Word of the week ryan.:RpS_thumbup:....enrichment..enriched corniice:-0




nice work by the way micky adams:RpS_thumbup:
i do the same thing...erm kinda.....well coving:RpS_blushing:

hehe mega buddy!!!:RpS_thumbsup:

 

[Marshy]

is he that bad - lol :RpS_laugh:

He will batter you with questions but not to be a smart ass he's just very keen and loves the job (you can't teach that) he gets a lot of stick on here from myself included but he's alright and he takes the banter so fair play to him! :RpS_thumbup:

 

[topstrop1]

Skin mould usually made from Alginate, Silicone or Latex. The first is just mixed with water and often used to reproduce a copy of a hand or foot (one off) The other two painted on the model then built up in layers with a thickener and then a support case.
Then there is the squeeze sometimes clay pressed over an embellishment and backing case in plaster but more often a coat of silicone brushed on backed with a thickened silicone and a backing case in plaster.

 

[topstrop1]

Will come back on the level3 project Ryan as I have just altered it with the CITB to simplify it a little. Drawings arrive from CITB for my approval tommorow