Looking for help

[Paul2603]

Hi we’re Loking for some help please sorry I know very little about plastering !! we have had some plastering done so we had artex on our walls and our plaster has boarded them but we have noticed a lot of damp stains on the walls we have had a look online and read that it could be deboning ? The picture below is a internal wall that joins on to our neighbour with out any previous damp issues

 

[JessThePlasterer]

Hi. That’s not debonded. That’s moisture being drawn through the drywall dabs

 

[John j]

Hi we’re Loking for some help please sorry I know very little about plastering !! we have had some plastering done so we had artex on our walls and our plaster has boarded them but we have noticed a lot of damp stains on the walls we have had a look online and read that it could be deboning ? The picture below is a internal wall that joins on to our neighbour with out any previous damp issues

Has he stuck the boards on to the artex

 

[Paul2603]

No

Hi we’re Loking for some help please sorry I know very little about plastering !! we have had some plastering done so we had artex on our walls and our plaster has boarded them but we have noticed a lot of damp stains on the walls we have had a look online and read that it could be deboning ? The picture below is a internal wall that joins on to our neighbour with out any previous damp issues

Has he stuck the boards on to the artex

Yes they have the artex wasn’t removed

 

[Paul2603]

Hi. That’s not debonded. That’s moisture being drawn through the drywall dabs

Would that be moisture be from the dabs then ? And will it eventually dry out that was done around the last week of February? And will it leave a stain on the wall ?

 

[ChrispyUK]

Would that be moisture be from the dabs then ? And will it eventually dry out that was done around the last week of February? And will it leave a stain on the wall ?

is the house warm, heating on?

 

[Stewie03]

Artex hangs like f**k as it is just skimming it,

 

[JessThePlasterer]

Would that be moisture be from the dabs then ? And will it eventually dry out that was done around the last week of February? And will it leave a stain on the wall ?

It should have dried by now. Seems to me there’s damp there coming through. Where in the house is this wall? What type of property is it?

 

[smoother09]

Decorator will get that!

 

[John j]

No


Yes they have the artex wasn’t removed

If it was silk paint on artex I.m surprised dots have keyed tomit

 

[hollybank]

If it was silk paint on artex I.m surprised dots have keyed tomit

Hanging by a thread!

 

[JessThePlasterer]

If it was silk paint on artex I.m surprised dots have keyed tomit

Oh I didn’t see that post!

that’s bad drills

 

[hollybank]

I don’t get why people dot boards on top of plaster and expect it to stick!

 

[tapit]

If it was silk paint on artex I.m surprised dots have keyed tomit

Who the f**k is Tomit?

 

[hstoke]

I don’t get why people dot boards on top of plaster and expect it to stick!

Very Lazy that n costing more

 

[Rossi46]

Hi. That’s not debonded. That’s moisture being drawn through the drywall dabs

I disagree, it’s a close up picture of a giraffe

 

[JessThePlasterer]

I disagree, it’s a close up picture of a giraffe

You’re so wise and pretty!

 

[MakeItSmooth]

Hi. That’s not debonded. That’s moisture being drawn through the drywall dabs

I have a slightly different theory...

 

[Monkey Boy]

I don’t get why people dot boards on top of plaster and expect it to stick!

I do

 

[paulf]

Who the f**k is Tomit?

Your secret sibling, he's heard of your success.

 

[Deleted member 49960]

That's a simple case of bridging from the wall to the plaster board!! Just hope he's scratched the artex heavily and used sbr as the primer!! Core drill a hole and see if the boards have bonded sufficiently!! Drill by a dab spot and see if it can be pull loose by moderate pulling! Don't worry about the marks they are comon during slow drying in cooler atmospheres...

 

[Monkey Boy]

Zinsser paint it
Sell house
Thread closed
Now the rendering mix ad below looks interesting

 

[Deleted member 49960]

That's a simple case of bridging from the wall to the plaster board!! Just hope he's scratched the artex heavily and used sbr as the primer!! Core drill a hole and see if the boards have bonded sufficiently!! Drill by a dab spot and see if it can be pull loose by moderate pulling! Don't worry about the marks they are comon during slow drying in cooler atmospheres...

Also make sure that you have air bricks in the wall even if its a 9inch brick to brick wall..

 

[Monkey Boy]

Also make sure that you have air bricks in the wall even if its a 9inch brick to brick wall..

 

[Deleted member 49960]

I do I'm a chancer!!

 

[Monkey Boy]

I’m not even that high up the hierarchy

 

[Monkey Boy]

 

[Deleted member 49960]

Monkey magicccccc...........

 

[Paul2603]

is the house warm, heating on?

Yes the hearing has been on for at least a couple of hours most evenings

 

[Paul2603]

It should have dried by now. Seems to me there’s damp there coming through. Where in the house is this wall? What type of property is it?

It’s a end terrace but that wall is not a external wall and there no known damp in the wall previously

 

[Paul2603]

That's a simple case of bridging from the wall to the plaster board!! Just hope he's scratched the artex heavily and used sbr as the primer!! Core drill a hole and see if the boards have bonded sufficiently!! Drill by a dab spot and see if it can be pull loose by moderate pulling! Don't worry about the marks they are comon during slow drying in cooler atmospheres...

We think they just knocked the raised bits from the artex and covered the wall with pva. This is probably the worst wall and it has a radiator on it the hearing has been on most evenings for a couple of hours for since mid March