I am a subi. Own van.pump.and 2 lads with me.over a 5 day working week 1 day 300 pound if 5 days day work for us it's not 1500 quid minus 20 percent it's 3000 grand minus 20 percent comments welcome
Don't make sense fellaI am a subi. Own van.pump.and 2 lads with me.over a 5 day working week 1 day 300 pound if 5 days day work for us it's not 1500 quid minus 20 percent it's 3000 grand minus 20 percent comments welcome
I am a subi. Own van.pump.and 2 lads with me.over a 5 day working week 1 day 300 pound if 5 days day work for us it's not 1500 quid minus 20 percent it's 3000 grand minus 20 percent comments welcome
What I'm getting at fella is I don't mind being f**k*d about 1 day a week but not for a whole week get it fellaDon't make sense fella
No buddySo you'll do 5 continuos days for the price of 4
And 10 for the price of 8?
So your lowering the day rate when there is more work?
You got it mate obviously you've been around the block .not like some of T***s on here . Cheers buddy.Normally putz we charge a better rate to other spreads and the like if they chuck us a week than a day.
Alot of 1 day is setting up and pulling off the job.
I guess you mean you don't wanna be stuck on a job for day rates all week long when u could be out there earning more on a job of your own etc
Christ sake I'll sleep better tonight now !!No buddy
You got it mate obviously you've been around the block .not like some of T***s on here . Cheers buddy.
A bag ?!!!! You sure ?Does anyone include R&S wear when pumping? Mine being stainless costs about 50p a bag to pump.
That's why we don't do day rate like that alway price job taking into account what @Rigsby said about r&s but will get covered by meters.Sorry lads I didn't mean it to be a head spinner . I should have explained better what l ment .
No pal obviously you know nothing about machine rendering .what are you probably a f**k**g skimmerOk second attempt,
Your saying you a charge what you want and they can like it or lump it, no discounts rate is the rate
have some of the posts off here been edited ?I am a subi. Own van.pump.and 2 lads with me.over a 5 day working week 1 day 300 pound if 5 days day work for us it's not 1500 quid minus 20 percent it's 3000 grand minus 20 percent comments welcome
That's why we don't do day rate like that alway price job taking into account what @Rigsby said about r&s but will get covered by meters.
Maybe on a sat well go pump a flack on and leave others to finish it for a price but depends how much
What rotor stator have you got for you ritmo?£273 inc vat plus postage so say £280 / .50 = 560 bags/ 40 to a pallet = 14 pallets.
It can be converted when my mixing shaft wears down. Apparently it will require a different mixing shaft and the wires changing round. got 1 1/4 spare r&s's left so maybe next year. I have a rare Ritmo with the stainless rotar.
No pal obviously you know nothing about machine rendering .what are you probably a f**k**g skimmer
What rotor stator have you got for you ritmo?
You're thinking of @Arti he's got the shiniest pump in the land.No mate just never used a machine so trying to figure what bullocks your chatting about.
No need to get all Barry on me I'm sure your a big tasty bloke who's far superior to anyone who handballs it with your shiny machine, yawnnnnnnnn
We use the throw away ones and was same with our m300.A red one with a clamp. the rotar is well shiny. But my last r&s appeared to be knackered but took it into Les and he weighed it. no wear at all. it was the stator at about £130.00. so maybe cheaper than I think.
I've had 4 pints tonight with a meal so im not sure if its hit me hard or what but i really aint got a clue whats going on with this one.
Are you basically saying that for £2.20m2 you could make my job pay???
Is this what happens when you get a machine u have to learn a secret language??
Bet it pumps more length too!!My missus has got a big shiny machine. She says it's quicker than me hand balling her too!
Too true. She just leaves me to rub up the 1.5mm on my own.B
Bet it pumps more length too!!