Microgobetis

[dai dog]

How long before coats on this stuff? & how long do you have to let it go before putting maite on? (I can't speak francais!) lol cheers guys.

 

[owls]

You realise maitie is an adhesive not a render, and Micro is a primer for render.

 

[dai dog]

It's what the rep recommended for the spec on the job, it's a very shiny face brick garden wall. 2 coats of microgobetis, maite+mesh base, pinned, then maite as dash receiver.

 

[User___removed]

It's what the rep recommended for the spec on the job, it's a very shiny face brick garden wall. 2 coats of microgobetis, maite+mesh base, pinned, then maite as dash receiver.

Seems a lot of fecking about for a garden wall

 

[owls]

It's what the rep recommended for the spec on the job, it's a very shiny face brick garden wall. 2 coats of microgobetis, maite+mesh base, pinned, then maite as dash receiver.

Ive never heard of that one,
maitie is the best adhesive you can get its like **** to the blanket. And 2 coats micro is shite what good is 2 coats going to give over 1 coat , none.
But I'd leave micro over night before anything goes on it this time of year and with no substrate suction in your case.

 

[CTPlastering]

Ive used it as a base coat with a bloke who knows his stuff on it , tight coat mesh it and a coat over the top and spat . Sponge it which was a nightmare .... Then stone any little bits when its went off . This is how i was shown i dont know alot about the stuff . Got somemore work with him soon . All this coloured and thin coat render is new to me ive just been brought up with the gd old stuff lol

 

[CTPlastering]

Then a acrylic top coat was going on it mind , the stoning wouldnt b nessasary if your dashing i supose .....

 

[dai dog]

Ive never heard of that one,
maitie is the best adhesive you can get its like **** to the blanket. And 2 coats micro is shite what good is 2 coats going to give over 1 coat , none.
But I'd leave micro over night before anything goes on it this time of year and with no substrate suction in your case.

would you bother with the microgobetis then?

 

[warriorupnorth]

I wouldn't . Just make sure the substrate is free of algae and dirt

 

[plasterjfe]

Are u sure it was a parwx rep told you that spec or was it a merchant? What rep was it.

2coats of micro should up the sales a tad

 

[xyzplasterer]

Is it an old garden wall? is it retaining? copings on top? adequate foundations?

I never render them unless we have built them, they always fail.

 

[RenditLtd]

Are you rendering the wall of a nuclear bunker?

 

[user_removed]

Would leave overnight as has been said, but also can't see the difference between 1 and 2 coats.

1 coat will give you a key, 2 coats will give you a key. Seems a waste of materials and labour

 

[User___removed]

Sand & cement on garden walls with a coping on top.simple and cost effective

 

[owls]

Both coats are a waste of time because there not doing anything.