Mock beam

[User________removed]

Following another thread regarding making oak beams from plaster i made a mock up today for the customer, first time ive done it so a bit trial and error.
I got some liquid rubber in the end and took some molds of some oak beams up the farm, they wasn’t the best to take from but was all that was there so had to make do, and ended up with some rubber printing mats 'ish.

This afternoon i built a box from left over plaster board, spread it with finish quite thick :RpS_blushing: and then when it had picked up a bit layed the mats on and went over with a rad roller leaving an imprint. Just needs staining now, although i think there’s things i can do differently next time, its been a good crack and don’t look to bad in the flesh !!

Link to pics

Link Removed

 

[Nisus]

Looks good mate :RpS_thumbup:

 

[Jace]

i cnt see the pics mate just goes through to a log in page:RpS_confused:

 

[Fatarm]

Nice one :RpS_thumbup:

 

[Jace]

ive seen them now they look mustard mate well in

 

[User________removed]

i cnt see the pics mate just goes through to a log in page:RpS_confused:

Shouldnt do mate.

 

[Nisus]

Here's one I did yesterday its not finished in the pic but looks s**t compared to yours like :-(
What do others think of my effort?? :RpS_biggrin:

 

[User________removed]

Can see it bud.

 

[User________removed]

Not looking forward to staining it like, the customer will prob tell me to do one lol.

 

[warriorupnorth]

Tidy mate, what did you use as a release

 

[Nisus]

Where did you get your liquid rubber from ??

 

[User________removed]

Nothing mate just waited til it was firm enough to push me thumb print in, then rolled the mats on and peeled them off.

 

[clayplasterman]

Tidy mate, what did you use as a release

hammer! :RpS_scared: iv'e been asked to do one in clay but in situ, sh$t am i allowed to mention clay or is that deemed as selling Paul.:RpS_crying:

 

[flat boy skim]

Tidy mate, what did you use as a release

i think he had a wank

 

[User________removed]

Where did you get your liquid rubber from ??

A place in Aston called polly fibre ltd. good kit just expensive.

 

[flat boy skim]

looks good mate,is it suppost to be done in finish?

 

[Nisus]

Hey fbs what you think of my pic mate just need some feedback like ??
Come on you can tell the truth :RpS_biggrin:

 

[User________removed]

looks good mate,is it suppost to be done in finish?

Yeah was all i had in the van mate so just tried it. the job will be going onto an rsj thats plaster boarded, theyve got one in the house already done in fiberous plaster, but not to familiar with the kit so tried it with some boardy.

 

[Fatarm]

Here's one I did yesterday its not finished in the pic but looks s**t compared to yours like :-(What do others think of my effort?? :RpS_biggrin:

Nailswater, are you up to your picture tricks again????? :RpS_sneaky: is this one in Africa also:RpS_laugh:

 

[Nisus]

A place in Aston called polly fibre ltd. good kit just expensive.

Cheers mate :RpS_thumbup:

 

[Nisus]

Nailswater, are you up to your picture tricks again????? :RpS_sneaky: is this one in Africa also:RpS_laugh:

how very dare you! As if I would mess about with work based photography :-0

I got another pic I'll put it up once i get some truthful feedback.

Sorry airborne I'm not hijacking your thread mate, I'll be gone in a bit :RpS_wink:

 

[warriorupnorth]

It's your ball sack aint it lee:RpS_wink:

 

[Fatarm]

It's your ball sack aint it lee:RpS_wink:

Shaved!:RpS_scared:

 

[Nisus]

No it's actually a new product called sandcrete!
Had it shipped in from abroad like :RpS_thumbup:

 

[Nisus]

Shaved!:RpS_scared:

No mate it's beddy that's shave his nads :RpS_biggrin:

Aka sconer!!

 

[flat boy skim]

Hey fbs what you think of my pic mate just need some feedback like ??
Come on you can tell the truth :RpS_biggrin:

looks like log cake lol

 

[lucius]

All looks good only ever done one and used a bark effect roller looked ok til the client painted it ended up looking like a fcuking great Mars bar

 

[Nisus]

looks like log cake lol

Ok fair enough mate.
But that pics zoomed in though.
So here's the full pic :RpS_cool:

 

[del]

^ didn't know refina did kids shovels

 

[Nisus]

^ didn't know refina did kids shovels

Yes mate there all the rage, plastic fantastic an all that :RpS_thumbup:

 

[NPS]

A place in Aston called polly fibre ltd. good kit just expensive.

mmmm might have a look and start making some dildos

 

[Jace]

the ones currently on the market not big enough for ya mate???:RpS_scared:

 

[andyR]

Yes mate there all the rage, plastic fantastic an all that :RpS_thumbup:

I bet spunky's got one

 

[NPS]

the ones currently on the market not big enough for ya mate???:RpS_scared:

was thinking of making some for all the women that i have been with,, 'ya cant put a tack where a nails bin' :RpS_biggrin:

 

[Jace]

orrr your goin to trick women into thinking you have a big penis