Mono Redo

[Arti]

Been asked if i can sort out someone else's attempt at mono.

Told the customer on the phone i would look at it sometime this week.

So, my question is, can you go over mono with more mono ?

Was thinking about using rendaid then maybe using 10mm beads if i can ?

or will an SBR slurry be enough to key it

Bloke says he has a few bags of rendaid leftover and enough mono to redo the panel.

Just wanna get an idea if its do able (i.e going over it with mono) before i go and have alook.

Sounds like there are loads of patches of misses from what i could make out on the phone...........:RpS_unsure:

Cheers

Arti
xxxxxxxxxxxxxxxx

 

[Builderboi]

Be safe knock it off and redo and use beddy boards to be safe

 

[Rigsby]

You will need to see if it can take the thickness?

 

[Andy M]

Weve done a couple.Microgobetis and then Mono with no probs.

 

[Arti]

Weve done a couple.Microgobetis and then Mono with no probs.

did you use 10mm beads or normal 15mm ?

 

[Andy M]

10mm Arti, the Micro sorted it.

 

[keithuk]

I would hack it off start again ,give the customer peace of mind ,the guy that messed it up in the first place work has gone ,fresh start

 

[clivo]

i did a mono over mono when i first started using it about 10 yrs ago, somebody had done exactly the same, anyway customer wanted it covered quick and only had pva, so i did it with no guarantee. its still on now,10yrs later

 

[Putzmiester]

Rake the beads back with a new scratcher,rend-aid with a roller and then put a tight coat over the top,should be fine mate
Take care when rubbing up nice and gentle

 

[layiton]

Yeah Micro, re bead(10mm) re render. Sweet

 

[Arti]

Cheers marra's

 

[Andy M]

You may have to knck the reveals off Arti, depending if you have enough width left on the frames to take a rebead.
Mono's a **** to chop off Keith.

 

[user__removed]

Or maybe see if you can get away with a stop bead and leave the reveals in place.

 

[theclemo]

Take off the mono it's more work for you

 

[Dansouthcoast84]

We are re doing a mono some firm.****** up at xmas. We are going over top with thincoat

 

[CTPlastering]

Was gunna say that clemo , why not ? Extra bit graft and a better job imo, its not secretly your job already is it arti :RpS_sneaky: haha only messin

 

[Arti]

I did the gable Monday / Tuesday this week. Hit on canny for the weather.....for a change....lol

Im just waiting for him to get his stone pillars installed out the front then i can get some new pics for my website.................:RpS_thumbup:

 

[User___removed]

We are re doing a mono some firm.****** up at xmas. We are going over top with thincoat

If the mono is flat but just a poor finish thin coat is the way

 

[Arti]

The job has other panels which the customer can live with so he wants to keep it all mono.............if it was just one panel on its own i would have went with thin coat............feewkin loads easier then titting on with mono on top of mono....................or is it mono et mono they say...............:RpS_unsure:

 

[raytheplasterer]

exterior grade pva and 6mm stop bead might do the job.