Morning all just introducing myself

[Basey’s plastering]

Morning all just introducing my self. just bought a Eze 24 and Looking for any tips thanks

 

[Groove37]

Morning and don’t eat yellow snow

 

[JessThePlasterer]

Hello! Welcome! You can do a search on it, plenty of threads! Have fun!

 

[djfleming22]

Hello

 

[Stevieo]

Morning all just introducing my self. just bought a Eze 24 and Looking for any tips thanks

Good morning and welcome to the forum.

My tip for you is that if you upset GPS he will follow you around for days, waving his boney little fists in the air.

 

[Arti]

Morning all just introducing my self. just bought a Eze 24 and Looking for any tips thanks

Sell it

 

[Smudger1]

Link Removed

 

[Olican]

Welcome along

 

[choppa]

Morning all just introducing my self. just bought a Eze 24 and Looking for any tips thanks

Good afternoon.

 

[ChrispyUK]

 

[Cockney]

Alright Geezer!

 

[Mickymoo83]

Link Removed

 

[Vincey]

Welcome what kind of jobs will you use it for ?

 

[Nicm]

Welcome.

 

[Formby plastering]

 

[vfr12]

Welcome! If you ask @Rossi46 , you should have gone for ritmo

 

[Rossi46]

Welcome! If you ask @Rossi46 , you should have gone for ritmo

Agree, strongly agree, cannot agree more.
Eze is good for spraying bucket coats.
Try base coats and it’s a ball ache. It didn’t like polymer base coats. The r&s used to whine it’s head off! OCR’s to get a half decent spray you need to keep the hopper really full to keep the gravity feed up. When it starts getting low it’ll spray so slow you could spray better with a bicycle pump.
I got lucky and got my money back on it.
It was a good Introduction to machines I suppose.

 

[Danny]

Welcome along

 

[Basey’s plastering]

Welcome what kind of jobs will you use it for ?

Areet mate I’ll be using it mainly to spray top coat but hopefully if it’s needed some mono and OCR

 

[essexandy]

Agree, strongly agree, cannot agree more.
Eze is good for spraying bucket coats.
Try base coats and it’s a ball ache. It didn’t like polymer base coats. The r&s used to whine it’s head off! OCR’s to get a half decent spray you need to keep the hopper really full to keep the gravity feed up. When it starts getting low it’ll spray so slow you could spray better with a bicycle pump.
I got lucky and got my money back on it.
It was a good Introduction to machines I suppose.

Well if you're going to just 'sit on the fence' I don't know why you bothered to reply?

 

[paulf]

 

[Rossi46]

Well if you're going to just 'sit on the fence' I don't know why you bothered to reply?

The P1SS hitmen will be heading my way