Mtec p100

[TomGoodeyPlastering]

After looking into getting a machine for lime rendering for a while, I have just bought a mtec p100. Which I believe to be the older version of the p50.

Just had a go of it last week an very impressed seeing as its an old machine!

Not got much info on it as that old!

Has anyone had experience with one?

its a 7.5 kw so wondering what size gene you would recommend?

Would 12kva genset be suitable?

I have a 3kw pan mixer that I would like to run off the gene too so would a 12 run them both?

 

[McPlaster]

we run a 7.5kw pump with a 20kva genny, we used to use a 16kva but it was slightly under powered but adequate if not at full speed.

 

[TomGoodeyPlastering]

Forgot to mention its three phase!

Hmm looks like a 20 would be better then.

What makes are good? It doesnt seem like there's much choice with 20kva?

 

[vfr12]

@Plasterers1StopShop

 

[McPlaster]

@Plasterers1StopShop

As above, they supplied us with both our generators, helpful firm.

 

[vfr12]

As above, they supplied us with both our generators, helpful firm.

I think they are the only ones who can supply you with 20kva generator and in the near future the only ones who will supply us with anything....

 

[Danny]

@Plasterers1StopShop

 

[Wezly]

I think they are the only ones who can supply you with 20kva generator and in the near future the only ones who will supply us with anything....

Pull your toungue out mate.

 

[vfr12]

Pull your toungue out mate.

Maybe I should! The f**k*r never gave me discount or treated me different