My m200 journey

Share this page

themucky1 said:
I was panning in selling as a complete kit and not separating, there over £1000new


Sent from my iPhone using Tapatalk
Click to expand...
What for the gun? The most expensive and latest - the zargomat is around 800 . Can you post a picture pls, so I know we are on the same page.
 
Yeh a grand for the jetset pro as you get a lot of kit with it there is an attachment with it so you can use it like the zargomat for applying adhesive to boards


Sent from my iPhone using Tapatalk
 
themucky1 said:
it's a gun with auto shutoff that connects to the cadddy, when you close the lever the machine stops no over spray, it comes with 1 gun, 25m electric cable, few size nozzles for thin coat work, standard spray lance for mono work and an attachment for pumping board adhesive onto eps


Sent from my iPhone using Tapatalk
Click to expand...
how much mate
 
themucky1 said:
Yeh a grand for the jetset pro as you get a lot of kit with it there is an attachment with it so you can use it like the zargomat for applying adhesive to boards


Sent from my iPhone using Tapatalk
Click to expand...
Zargomat is completely different than any predecessor



and if you have paid 1000 for the jetset pro......
in my opinion that’s bad deal for you mate. Sorry to say!
 
vfr12 said:
Zargomat is completely different than any predecessor



and if you have paid 1000 for the jetset pro......
in my opinion that’s bad deal for you mate. Sorry to say!
Click to expand...


How is it different to the jetset It glues so does the jetset and sprays thin coat so does the jetset the only difference is the zargomat can be used with one hand! but unlike the jetset you don't get a spraying lance with a zargomat you get a lot of kit for the money with the jetset and dont ya think I also looked at the zargomat whilst looking at the jetset, I never paid £1000 for it as I had mine from Germany I was pointing out how much thy are. So in my opinion I got a good deal for a good bit of kit


Sent from my iPhone using Tapatalk
 
themucky1 said:
How is it different to the jetset It glues so does the jetset and sprays thin coat so does the jetset the only difference is the zargomat can be used with one hand! but unlike the jetset you don't get a spraying lance with a zargomat you get a lot of kit for the money with the jetset and dont ya think I also looked at the zargomat whilst looking at the jetset, I never paid £1000 for it as I had mine from Germany I was pointing out how much thy are. So in my opinion I got a good deal for a good bit of kit


Sent from my iPhone using Tapatalk
Click to expand...
Cleaning is easier, you can turn it without the hose twisting your wrists and is more comfortable to use .
 
themucky1 said:
How dya know that have you got a jetset aswell?


Sent from my iPhone using Tapatalk
Click to expand...
Not anymore. I am looking for replacement now and will be either the zargomat or another model which is around £500 and way better than the jetset
 
vfr12 said:
Not anymore. I am looking for replacement now and will be either the zargomat or another model which is around £500 and way better than the jetset
Click to expand...

Good for you then pal [emoji1534]


Sent from my iPhone using Tapatalk
 
And Pft have a cheap version of spray gun which is around the £250 mark and does brilliant job
 
wall2wall said:
A few weeks ago, we bought an M200 from Plasterers one stop shop.

Ryan was super helpful from the get go, i rung up on a wed, picked the machine up Friday and they managed to squeeze our training in last minute.

Anyway, we got to site on the Monday, and ive had the worst 2 weeks of my life, you think of a problem, we had it, i was going to just weigh the thing in, bloody useless. I cannot even begin to try and express in words my anger towards an innanimate object, nor can i begin to list the problems.

The guys were very helpful, i rang them untold amounts of times and every time there was a solution, in the end Paul came down, brought a generator, and today we wacked on 60m with ease and in no time, the machine didnt skip a beat, it was like clockwork. Honestly, i couldnt believe the difference, all the issues we had were because the power. And had we had bought a geni from the start, we probably wouldnt have had 5% of the problems we did have...... live and learn

Anyone thinking of getting an M200, just buy the geni, i bought one today and they sent it out to be with us tomorrow. (Great service again)

Just wanted to post something, where people who are thinking of buying one will see, and also to say how great Ryan, Andrew, Paul and Dave have been, and how happy we are with the machine now its running properly.

Its a relatively large investment, compared to the rest of our tools, and it is worrying, especially when you get all these problems, but now its working we will have it paid off in no time.

Thanks again guys,

Remi
Click to expand...
Hi mate , have u still got the Mtec 200 and are they any good? As I’m thinking of buying one .
 
You must log in or register to reply here.
Top