Nela s*p*r*lex users

Status
Not open for further replies.
@Ajdbuild welcome along :-)

Have a beer and wind down :D Its only dust and water...lol I know how you feel though!!!
@Curry @Plasterers1StopShop will sort it out :-) My one has not done it yet and it spends most of its time sat in water :-\ I had a very very very early one though :D
 
Last edited:
Danny said:
@Ajdbuild welcome along :-)

Have a beer and wind down :D Its only dust and water...lol I know how you feel though!!!
@Curry @Plasterers1StopShop will sort it out :-) My one has not done it yet and it spends most of its time sat in water :-\ I had a very very very early one though :D
Click to expand...
I have ran a bead of clear silicone along the edge of mine, to stop the water and dust ingress seems fine
 
Thanks @Danny this is facebook but different ! I'm only 24 started up 2 years ago been through 6 blokes working for me .il never stop working everyday love it
 
Last edited by a moderator:
Curry said:
@Danny @Plasterers1StopShop

I know Ryan will this is just a lazy way of me sorting it. Trouble is have is we still use them everyday
Click to expand...

My Nela 16" is coming apart at both ends!
Hassop hand tools said send it back, but that means no trowel for a working week.

Just going back to Refina as despite their faults, they don't fall apart ... and I can chuck it on the trade counter if it did.

Nela s*p*r*lex didn't make it to 1st base for me ... barely broken in and falling apart - not fit for purpose!

... and I don't want to hear any of the first batch bollox ... it failed miserably!
 
Fibrehand7 said:
Ryan, will it be newer version of Nela flexi in the pipeline ? Any luck on 20" ones? @Plasterers1StopShop
Click to expand...

What do you mean by a newer version mate? We have just released the new ones.. Also will be having another version out soon.

Have someone testing the 20" ATM, Personally I think its too big, but we shall see
 
DMA said:
My Nela 16" is coming apart at both ends!
Hassop hand tools said send it back, but that means no trowel for a working week.

Just going back to Refina as despite their faults, they don't fall apart ... and I can chuck it on the trade counter if it did.

Nela s*p*r*lex didn't make it to 1st base for me ... barely broken in and falling apart - not fit for purpose!

... and I don't want to hear any of the first batch bollox ... it failed miserably!
Click to expand...

Understand your disappointed. You wont be without it for a week... He should send you one straight away. Any problems call me and i will sort it out for you. Get yours collected tuesday, new one with you for Tuesday.

As for the faults, every manufacturer has had this happen - FACT.

It is only a small amount of the first batch where there have been issue, from the same batch. Over 5000 sold and trust me we haven't had anywhere near this in returns. Less than 50.

There is a reason we offer a warranty on this and stick to our word
 
Ajdbuild said:
Before I bought this trowel I read about all the good things but there no negatives about it so I bought it tryed it found its a hit and miss which I can't afford on jobs and now more people are saying the negatives .are these people that say the negatives are checking there work just like a really picky foreman would .
Click to expand...

Try the refina s*p*r*lex.
 
@Plasterers1StopShop Ryan av sent you a couple of PM's over the last few weeks. Just wondered if you have received them or you've just put me on the naughty step............................:RpS_unsure:
 
Last edited by a moderator:
this is a serious question.. does everyone look after their trowels..at work and in transit ? just wondered why a few seem to have broke.. im really careful with all my trowels, none get thrown about and i have had no problems at all.. just wondered if this may be a cause ?? or it may well be the old batch had the problem, I know some spreads just throw their trowels about and dont look after them in my opinion...
 
cassie said:
this is a serious question.. does everyone look after their trowels..at work and in transit ? just wondered why a few seem to have broke.. im really careful with all my trowels, none get thrown about and i have had no problems at all.. just wondered if this may be a cause ?? or it may well be the old batch had the problem, I know some spreads just throw their trowels about and dont look after them in my opinion...
Click to expand...

i don't throw mine about, cassie. it just split. about an inch at the toe, and recently slightly at the heel. don't use it as a scraper, don't use it as a scoop etc. just to trowel up. don't get the riding over bumps thing everyones going on about. don't get that. get your first coat flat. nor the tiger stripe thing. lubricate the trowel when trowelling up. a good trowel with teething problems probably.
 
Jurek said:
i don't throw mine about, cassie. it just split. about an inch at the toe, and recently slightly at the heel. don't use it as a scraper, don't use it as a scoop etc. just to trowel up. don't get the riding over bumps thing everyones going on about. don't get that. get your first coat flat. nor the tiger stripe thing. lubricate the trowel when trowelling up. a good trowel with teething problems probably.
Click to expand...

i think most look after their tools, especially skimming trowels... just a thought... what size s*p*r*lex mate ? did it delaminate ?
 
yeah, it did cassie. 14 inch. can use the refina from start to finish but the nela just to finish. been using the eze spat to finish this week. never thought it would work but it does. big empty shop and flats above with nobody there so had time to correct it if it went tits up. big panels, like, not little fiddly bits. don't know what my routine will be next week. when i joined TPF i had a tyzack thirteen inch, a handboard, a gauging trowel and a small builders bucket. now i cant even get the stuff in the van
 
you've lost your roots big lad........................you disgust me...........................:glare:
 
Arti said:
@Plasterers1StopShop Ryan av sent you a couple of PM's over the last few weeks. Just wondered if you have received them or you've just put me on the naughty step............................:RpS_unsure:
Click to expand...

Sorry mate, will have a look again. In hospital at the moment so when I'm sorted will respond.

Lads,

Im going to be off work for a few days and not on the forum. Had a pretty nasty injury at rugby. If you have any problems or questions please bare with me

Ryan
 
Plasterers1StopShop said:
Sorry mate, will have a look again. In hospital at the moment so when I'm sorted will respond.

Lads,

Im going to be off work for a few days and not on the forum. Had a pretty nasty injury at rugby. If you have any problems or questions please bare with me

Ryan
Click to expand...

Best wishes for a speedy recovery ryan.
 
ferraris catch fire :-) It was a teething problem :-)

Ryan works hard and I dont know any other trowel that offers such a long warranty (maybe 5 years I think)

Get well soon ryan :D
 
cassie said:
this is a serious question.. does everyone look after their trowels..at work and in transit ? just wondered why a few seem to have broke.. im really careful with all my trowels, none get thrown about and i have had no problems at all.. just wondered if this may be a cause ?? or it may well be the old batch had the problem, I know some spreads just throw their trowels about and dont look after them in my opinion...
Click to expand...

I felt a click troweling up when mine was a week or so old. When I looked later I noticed that it had started letting go.
It has been kept mint from day 1, always washed in clean water, never been scraped clean or used as a scraper & lives on the dash board.

I'm more peeved because I knew there was a problem & waited until P1SS said it was all sorted .... and still got a wrong 'un!

The most expensive trowel I ever bought was the only one that ever broke - and so fast too!

I fully expect a premium trowel to wear out, I do not appreciate being a beta tester for Nela.
 
The nela premium will never ever wear out :-D
After the nuclear Holocaust cockroaches and nela premiums will be all thats left.
 
scottie5 said:
The nela premium will never ever wear out :-D
After the nuclear Holocaust cockroaches and nela premiums will be all thats left.
Click to expand...

Been screeding with the premium all summer & trying to knock it into shape - They are well made I agree!
 
Scott you need help or beer to sober up??? Those "premium" trowels area only fit for scraping floors !?? :-0
 
Marshy said:
Scott you need help or beer to sober up??? Those "premium" trowels area only fit for scraping floors !?? :-0
Click to expand...

Lol the premium is not my cup of tea greg, but having seen the lengths chris has gone to to try and break his in.
I have to admit they appear very well put together maybe a little too well.
Some sort of hybrid adamantuim/granite alloy perhaps.
 
Changing the subject slightly would you say the refina s*p*r*lex is better made than the nela an why I didn't use one before the nela just wondering if there is a great difference
 
madmonk said:
Changing the subject slightly would you say the refina s*p*r*lex is better made than the nela an why I didn't use one before the nela just wondering if there is a great difference
Click to expand...

I wouldnt say the refina is any better made if anything its slightly more delicate/flexible which in my opinion gives it the edge.
Have used the refinas since they first came out so quite sometime now.
But In the interest of fairness have now got an 18" nelaflex which ill give fair crack of the whip, will then be able to make a completely unbiased comparison.
 
DMA said:
My Nela 16" is coming apart at both ends!
Hassop hand tools said send it back, but that means no trowel for a working week.

Just going back to Refina as despite their faults, they don't fall apart ... and I can chuck it on the trade counter if it did.

Nela s*p*r*lex didn't make it to 1st base for me ... barely broken in and falling apart - not fit for purpose!

... and I don't want to hear any of the first batch bollox ... it failed miserably!
Click to expand...

Just get a free replacement. Get it a bit dirty and bag t on eBay as broken in and sell for more than the new price......it's easy
 
Plasterers1StopShop said:
Remember your new NELA isn't the one we want for you though mate. Got a better one on route :-)
Click to expand...

Just picked it up bud, it's a beautiful looking trowel :RpS_thumbsup:
I really appreciate the lengths you've gone to, thats customer service taken to a
whole new level.
Hope your op went well and a speedy recovery follows.
Best wishes pal.
 
i only used the nela for the final trowel or two. wheres it differ from a flexi venetian trowel like this

Link Removed
 
Status
Not open for further replies.
Back
Top