New to plasters forum

[joss01]

I am a retired plastering lecturer specialising in conservation, restoration and fibrous work just wanted to see how the plastering market has evolved.

 

[Olican]

Welcome along, I hope you stick around , sounds like you could add some decent input

 

[Nicm]

Welcome.

 

[Colin 879]

I am a retired plastering lecturer specialising in conservation, restoration and fibrous work just wanted to see how the plastering market has evolved.

It’s hasn’t still geezers pushing pink s**t up the walls but now there’s 6 million different trowels to trowel them up with

 

[Olican]

Quick question;. Do you think 3d printing will impact the fibrous market? I spoke to a fibrous plasterer and was convinced photo scanning will change the the trade. For example, I plastered a new bathroom that was built in a tall Victorian house. Needed about 4 lm of cornice to match existing, apart from the installation most of the work was done with a computer

 

[puddove]

I am a retired plastering lecturer specialising in conservation, restoration and fibrous work just wanted to see how the plastering market has evolved.

welcome to the forum/mad house -which college were you based at -

 

[Retired Spread]

it's evolved into a chancing corsa's paradise

 

[Deleted member 32554]

Quick question;. Do you think 3d printing will impact the fibrous market? I spoke to a fibrous plasterer and was convinced photo scanning will change the the trade. For example, I plastered a new bathroom that was built in a tall Victorian house. Needed about 4 lm of cornice to match existing, apart from the installation most of the work was done with a computer

I was on to @The Hobo about this a while back , he replied with several comments on his progress









Unfortunately , only of how his bottle of rum was going down

 

[ChrispyUK]

Welcome

 

[jamesthefirst]

You can now spread it on to smooth boards which it sticks to and doesn’t fall off!

 

[paulf]

It's still a dusty job that requires a s**t loads of lager to wash it away.

 

[The Hobo]

Quick question;. Do you think 3d printing will impact the fibrous market? I spoke to a fibrous plasterer and was convinced photo scanning will change the the trade. For example, I plastered a new bathroom that was built in a tall Victorian house. Needed about 4 lm of cornice to match existing, apart from the installation most of the work was done with a computer

I was on to @The Hobo about this a while back , he replied with several comments on his progress









Unfortunately , only of how his bottle of rum was going down

 

[tapit]

I am a retired plastering lecturer specialising in conservation, restoration and fibrous work just wanted to see how the plastering market has evolved.

It hasn't, the daft f**k**s are still fixing beads with roofing nails and staples!

 

[The Hobo]

It hasn't, the daft f**k**s are still fixing beads with roofing nails and staples!

used staples on Friday to fix sim bead to a sand and lime corner 10 seconds job done

 

[Stevieo]

I am a retired plastering lecturer specialising in conservation, restoration and fibrous work just wanted to see how the plastering market has evolved.

What's your number buddy?

 

[Cockney]

What's your number buddy?

 

[themucky1]

used staples on Friday to fix sim bead to a sand and lime corner 10 seconds job done

If only there were some other way of fixing a bead without nails tacks or staples???????? Maybe like some special tape

 

[The Hobo]

If only there were some other way of fixing a bead without nails tacks or staples???????? Maybe like some special tape

don't wake that stupid bazturd up ffs

 

[Deleted member 32554]

I am a retired plastering lecturer specialising in conservation, restoration and fibrous work just wanted to see how the plastering market has evolved.

Cieling board ends mid joists








You know it makes sense

 

[Cockney]

Cieling board ends mid joists








You know it makes sense

 

[tapit]

used staples on Friday to fix sim bead to a sand and lime corner 10 seconds job done

 

[jamesthefirst]

If only there were some other way of fixing a bead without nails tacks or staples???????? Maybe like some special tape

Or skim, dab or bonding.

 

[smoother09]

New so fresh and well mannered! That won’t last!! Remember when @tapit waa all timid now he’s a complete gobshite!

 

[tapit]

New so fresh and well mannered! That won’t last!! Remember when @tapit waa all timid now he’s a complete gobshite!

Just adapting to the surroundings, different today at church.