Newby

I

Itsshreck

New Member
hi guys hope I am in the correct place if not please advice were I should post this

My question is this
I am currently in spain and I have built an extension out of steel and externally OSB board I have set everything up to do it the traditional English way
but as I am fast learning that is not always the right way due to cost and getting the correct materials

So I have noticed that the spanish plaster straight over the OSB board with a mesh impregnated in the plaster
but before they do that they use one sort of
Coating I think it's SBR styrene butadiene rubber with some fine sand in it

Any one got any idea if I am right or can point me in the right direction ?

Thanks everyone
 
Itsshreck said:
hi guys hope I am in the correct place if not please advice were I should post this

My question is this
I am currently in spain and I have built an extension out of steel and externally OSB board I have set everything up to do it the traditional English way
but as I am fast learning that is not always the right way due to cost and getting the correct materials

So I have noticed that the spanish plaster straight over the OSB board with a mesh impregnated in the plaster
but before they do that they use one sort of
Coating I think it's SBR styrene butadiene rubber with some fine sand in it

Any one got any idea if I am right or can point me in the right direction ?

Thanks everyone
Click to expand...
Get yourself sika latex and mix with sand and cement to create slurry .
 
If you got a Bigmat near you they do a pretty good grip primer I've used to in 5 or 10 kg tubs made by mapei I think
 
Hi thanks for reply nothing like that around here the stuff they use looks like a pva with sand in it

That you apply to the bare surface of the wood so you have got something to key to
 
You must log in or register to reply here.

Share this page

Back
Top