Next time you are fed up skimming over artex remember this

[Vincey]

Thought we had it bad but if this is what they have to do the other side of the pond I will never moan again about skimming over artex
Ps it is a long ish video, maybe flick through to the best bits

 

[Dropsalot]

Sooner or later that’s how you’ll be skimming. Note:
1. Easy application.
2. No trowel skills.
3. If all else fails, it’s gonna be sanded anyway!

 

[Retired Spread]

I eventually found the best bit.....the end.

 

[zolco]

In the continent they put airless plaster on with rollers kinda similar thing to kanufs roll on thingy

 

[Deleted member 32554]

Nobody ever shines a light and the camera close up and along , I wonder why

 

[Morgan James]

Hahahaha what have i just seen!

 

[SmoothCriminal]

Good luck doing a ceiling with this gear. I don’t think they could better plaster, some things have reacted it’s best way to do it. Not everything is ment to get better an easier. Take a fork for example, can’t be made or altered anymore. People want to just leave it along an stop producing s**t after s**t,, tool after tool. Just f**k off.

 

[jamesthefirst]

Always ask for a fork in Chinese restaurant as never been happy using the chopsticks!

 

[Tinytom]

Good luck doing a ceiling with this gear. I don’t think they could better plaster, some things have reacted it’s best way to do it. Not everything is ment to get better an easier. Take a fork for example, can’t be made or altered anymore. People want to just leave it along an stop producing s**t after s**t,, tool after tool. Just f**k off.

The man speaks sense

 

[lurpak]

Never minded skimming artex. Nice key and always hangs so can get big gauges on

 

[Danny]

Always ask for a fork in Chinese restaurant as never been happy using the chopsticks!

I am lost

 

[JessThePlasterer]

I wonder if he did the bit round the wire in the end or if he was stumped by his spat being too big... scratches head... realises he wasn’t even provided with a tiny roller for that bit either