Ocr advice needed

Rigsby said:
With the pre bagged ocr’s some are waterproof like Parmurex for example.

Usually as a base coat this is good for when the humidity in the air rises like it does from October on then it is the usual problem of going on wet and staying wet all day.

Accelerator will help, but it still sets full of water. A bot different to when it sets and surface dries.

What I tend to do in the colder months but in a sand and cement sense is scratch coat with waterproofing in then a second scratch without.

This causing initial grab because of suction and dries the surface to a point.

There are problems to consider though. The waterproofer will send the water to the bottom, the top will soon dry and rub up but the bottom will still hang. If its a big wall then use accelerator and start at the bottom and work up.

I am not too sure about suction on other ocr’s like Weber etc. I usually put a ocr over a base coat so no suction. Maybe if the ocr’s that do suck then a scratch coat over base if costs allow.
Click to expand...
Told you the man is a genius
 
I just tried to find receipt I’m sure though it was £8 ish inc vat from Ccf , last week I walked out of there arguing with them about prices on crappy skim , one day I’m gonna open my own merchants I swear
 
Vincey said:
I just tried to find receipt I’m sure though it was £8 ish inc vat from Ccf , last week I walked out of there arguing with them about prices on crappy skim , one day I’m gonna open my own merchants I swear
Click to expand...
I hate ccf. They’re arrogant ***** in Liverpool. Travis are the same group that’s why I ended up going there instead.
 
@Vincey We could set up a prices thread in the private section and list what, when, and how much we’ve paid then we’ve got an idea of a good starting point.
 
Rossi46 said:
@Vincey We could set up a prices thread in the private section and list what, when, and how much we’ve paid then we’ve got an idea of a good starting point.
Click to expand...
Do it mate I’ve been on about this for ages , everyone laughed at me when I said everything is marked up 100% in some places , not laughing now are they
 
Vincey said:
Do it mate I’ve been on about this for ages , everyone laughed at me when I said everything is marked up 100% in some places , not laughing now are they
Click to expand...
For the record I hit the "agree" button because yes everybody is laughing at you.


I still like you tho pal(y)
 
CeeVee said:
Wheres that from boss?
Click to expand...

It's called kilsaran druarend. Get it here in Ireland Direct off them that make it. Its good stuff when u get used to it.

Ocr advice needed
 
@Vincey is sound and made a good point regard these rip off c**ts name and shame with everybody who reads this site it might be a good thing?
 
Renders SW said:
I think cpi is about 4.50 a bag and it's lovely to use , nice to skim on and nice outside
Click to expand...
It is quite nice but it’s a bit stoney. Prefer OCR myself. Does skim over really nice though like you say.
Waterproofer in it is strong so outside this time of year it would be a ballache.
 
Rossi46 said:
It is quite nice but it’s a bit stoney. Prefer OCR myself. Does skim over really nice though like you say.
Waterproofer in it is strong so outside this time of year it would be a ballache.
Click to expand...
I tend to use OCR for tyrolean and it tucks in nicely.
Yes...surprisingly I've had quite a bit of tyrol to do this year! :envidioso
 
You must log in or register to reply here.

Share this page

Back
Top