One coat wonder

Its b*ll***s end f**k**g of
Lol. It doesn't matter how u finish skim as long as it's a good job. Just because it doesn't suit u don't make it s**t. Skimming is a load of b*ll***s end of when you compare it to airless plaster anyway. And even a painter can do it to a high standard.
 
Anyone else being a bum like me and is off. Don't know what to do with myself.
I been off since friday and starting to get a bit bored...re doing a bedroom and 2 bags of magnetic turned up this morning but my mrs wont let me start until after xmas as too much mess before
 
I been off since friday and starting to get a bit bored...re doing a bedroom and 2 bags of magnetic turned up this morning but my mrs wont let me start until after xmas as too much mess before
I've been off all week and didn't even have a drink yet. But am taking the lads on Xmas party tonight. It's going to be a mad one.
 
:numberone: Not surprised to see orange mans comments tbf he mainly uses the French made Parex onecoat outside stuff, maybe good idea if you read back of bag again might help you out , oh and it's instructions are in English.. if you can read :risas:
One coat wonder
 
Nice hangover to look forward to tomorrow:birra:
Am looking forward to it :(. I have a nice surprise for 2 of the lads. They are all ways going on one will kill the other. So am taking them up to the boxing club at the end of the night lol will be funny.
 
Didnt think you used a board

I don't very often Gary but for some reason these last couple of pallets of multi are firing off proper quick in the bucket yet on the spot board it's ok.
theres not normally much in it but this gears very strange.
trowelling up well though.
 
:numberone: Not surprised to see orange mans comments tbf he mainly uses the French made Parex onecoat outside stuff, maybe good idea if you read back of bag again might help you out , oh and it's instructions are in English.. if you can read :risas:
View attachment 15375

If only you knew how to render!!!
To be honest I've never needed instructions how to apply plaster
Your a One trick pony!!!


Sent from my iPhone using Tapatalk
 
Last edited:
Well wasn't really after a debate but nature of social media means we get one anyway. Don't get many opportunities to experiment so I was always going to give something a try.

Anyways covered tapes and filled beads before starting all times and original post way came up pretty good, I was taking the speedy as far as I could that time and it's easily passable on site and still better then any other plasterers works I've followed this year.

Second time. Put on flattened with speedskim. Sponged it, mediflex a couple times then plastic fantastic. Came up ok, still better the plasterers work I've seen and would pass on site but I'm not sold on it, slightly bumpy, doubt anybody will notice it.

Third time I thought I would see how good it can be so put it on, 18" carbon MT, sponge, 18" again, 14" carbon MT. And finally 14" nelaflex2........ absolutely bang on. I would put money on that, the only thing that competes with that is 2 coating with fresh gear.

As others have said If you lay wet on wet, which let's face it 99% if us have it is actually no different to one coating, Sponge or not.

Tbh I'm probably more bothered that the medi and plastic didn't do so well. And also the more I use them the more I think the speedy Kim's are not the best at anything more then flattening initial stages... and I really wish that wasn't the case.

Still enough of plastering for now. All work can get f**k*d till at least wed, hopefully year :) merry xmas
 
Well wasn't really after a debate but nature of social media means we get one anyway. Don't get many opportunities to experiment so I was always going to give something a try.

Anyways covered tapes and filled beads before starting all times and original post way came up pretty good, I was taking the speedy as far as I could that time and it's easily passable on site and still better then any other plasterers works I've followed this year.

Second time. Put on flattened with speedskim. Sponged it, mediflex a couple times then plastic fantastic. Came up ok, still better the plasterers work I've seen and would pass on site but I'm not sold on it, slightly bumpy, doubt anybody will notice it.

Third time I thought I would see how good it can be so put it on, 18" carbon MT, sponge, 18" again, 14" carbon MT. And finally 14" nelaflex2........ absolutely bang on. I would put money on that, the only thing that competes with that is 2 coating with fresh gear.

As others have said If you lay wet on wet, which let's face it 99% if us have it is actually no different to one coating, Sponge or not.

Tbh I'm probably more bothered that the medi and plastic didn't do so well. And also the more I use them the more I think the speedy Kim's are not the best at anything more then flattening initial stages... and I really wish that wasn't the case.

Still enough of plastering for now. All work can get f**k*d till at least wed, hopefully year :) merry xmas


At end of the day who gives a f**k what anyone does with the s**t , aslong as it looks good when painted that's all that matters
 
At end of the day who gives a f**k what anyone does with the s**t , aslong as it looks good when painted that's all that matters
You talk the most sense on here. There are people who can't one coat, there are people who can't two coat, and there are people who don't know how to sponge. But at the end of the day, s**t work is s**t work and good work is good work it does not mater how it is done. I one coat plasterboard but fill the joints and reveals. Been doing it 40 yrs and never had problems.
 
You talk the most sense on here. There are people who can't one coat, there are people who can't two coat, and there are people who don't know how to sponge. But at the end of the day, s**t work is s**t work and good work is good work it does not mater how it is done. I one coat plasterboard but fill the joints and reveals. Been doing it 40 yrs and never had problems.

No one dabbed reveals 40 years ago.
Have you left theshed since then ??
 
Top