Pft

[Ftp321]

Noticed from a lot of old posts that pft used to come on here, did they get bombarded with questions about machines so got stick of it?

 

[McPlaster]

Don't think soo, they sell and promote PFT products and are helpful blokes, call them if you need advice.

 

[Ftp321]

Don't think soo, they sell and promote PFT products and are helpful blokes, call them if you need advice.

I know they are speak to them regularly just don't know why they don't come on the forum anymore never asked them

 

[Vincey]

Noticed from a lot of old posts that pft used to come on here, did they get bombarded with questions about machines so got stick of it?

I miss some of the threads from times past not just pft machine threads also the debates about different materials and folks techniques of work a across the country, sometimes I spend time ready the way back threads

 

[martinemj]

When I first came on back in 2009 they were all on here ....
gained a lot of info about machines and materials before I bought one

Took a break from site for few years
Not sure what happened @Danny ?

 

[tapit]

I miss some of the threads from times past not just pft machine threads also the debates about different materials and folks techniques of work a across the country, sometimes I spend time ready the way back threads

me too, much more interesting than looking at pics of plates of meat .

 

[Danny]

When I first came on back in 2009 they were all on here ....
gained a lot of info about machines and materials before I bought one

Took a break from site for few years
Not sure what happened @Danny ?

They did not want to pay for advertising...

 

[themucky1]

They did not want to pay for advertising...

You must be expensive then lol

 

[Danny]

You must be expensive then lol

I wish I was....

based on the amount of machines that got sold off the back of this place my fee was sod all...

 

[Plasterers1StopShop]

We are still on here and can help with any make and model of machine

Shame they aren’t on here anymore, enjoyed the debates and discussions. But the forum isn’t free and it’s only fair if we sell on it. We pay.

 

[Ftp321]

I wish I was....

based on the amount of machines that got sold off the back of this place my fee was sod all...

That's fair enough

 

[martinemj]

We are still on here and can help with any make and model of machine

Shame they aren’t on here anymore, enjoyed the debates and discussions. But the forum isn’t free and it’s only fair if we sell on it. We pay.

Although I do remember some heated debate

 

[Ftp321]

Although I do remember some heated debate

I was reading one today with a giant middle finger sent by Ian

 

[Danny]

I speak to jonesy most days

 

[Ftp321]

I speak to jonesy most days

He's a great bloke very helpful always got time to talk

 

[Plasterers1StopShop]

Although I do remember some heated debate

Yes, there was back in the day, sometimes strength in numbers.... We are still here ;-)

 

[martinemj]

He's a great bloke very helpful always got time to talk

Yea bought my first machine from him ...

 

[themucky1]

I wish I was....

based on the amount of machines that got sold off the back of this place my fee was sod all...

What is your fee then? I got a few tubs of old texture I want to sell lol

 

[Topspread16]

Yes, there was back in the day, sometimes strength in numbers.... We are still here ;-)

Are you getting them 120litre putz tubs back in stock Ryan?

 

[Vincey]

One day I’ll open my own pft shop , if I get it I’ll pay the advertising and bring pft back

 

[Plasterers1StopShop]

Are you getting them 120litre putz tubs back in stock Ryan?

100% yes mate, delivery due anyday - sorry for the delay

 

[Topspread16]

100% yes mate, delivery due anyday - sorry for the delay

Let me know when they’re in after a few bits and bobs been keeping an eye out for them coming back in stock before ordering.

 

[Rigsby]

We are still on here and can help with any make and model of machine

Shame they aren’t on here anymore, enjoyed the debates and discussions. But the forum isn’t free and it’s only fair if we sell on it. We pay.

lol. Jonesy gave you a run for your money.

good days.

 

[essexandy]

I wish I was....

based on the amount of machines that got sold off the back of this place my fee was sod all...

To be fair they didn't charge anyone for the wealth of knowledge and help they dished out to whoever asked a question.
Just for balance.

 

[McPlaster]

Those fellas were all renderers with on site knowledge, meaning they know how stressy it can be.

 

[essexandy]

Those fellas were all renderers with on site knowledge, meaning they know how stressy it can be.

Stuart is a top bloke.

 

[Ftp321]

Stuart is a top bloke.

Les Ian and Stuart have all helped me out and advised me on several occasions,
They'll help anyone out,

 

[Danny]

To be fair they didn't charge anyone for the wealth of knowledge and help they dished out to whoever asked a question.
Just for balance.

no but when other companies on here are paying for the privilege and are also giving out advice and knowledge then it has to be equal....

It was still a nominal amount as well...

 

[Plasterers1StopShop]

lol. Jonesy gave you a run for your money.

good days.

He tried, liked to copy my ideas as well ;-)

 

[Plasterers1StopShop]

Stuart is a top bloke.

Having met Stuart several times I agree. He’s a decent guy

 

[Rigsby]

Having met Stuart several times I agree. He’s a decent guy

Yes, Stuart welcomed me to spend a day learning how to apply a full Santane system back in the L&D forum days.