Pink Grip

[Vincey]

Weber and parex say not to use it due to it causing issues with products and not correct procedures for beading in the bead but has anyone actually had a problem as such with either of these ?

 

[Formby plastering]

Weber and parex say not to use it due to it causing issues with products and not correct procedures for beading in the bead but has anyone actually had a problem as such with either of these ?

I used grip fill the other day everything still seems OK.

 

[choppa]

Weber and parex say not to use it due to it causing issues with products and not correct procedures for beading in the bead but has anyone actually had a problem as such with either of these ?

Haven’t had any problems with it mate. I also no some lads that are s**t hot at all external renders and they swear by pink grip.

 

[Spray]

Every manufacturer has come out and said they won’t warranty pinkgrip !
The reasons in my opinion are they would like to sell you their own material to bead with ! And some guys have been daft and had issues !
The facts are that pinkgrip is fine if used correctly

 

[Vincey]

Thanks for the replies,
In op it should of read bedding in the bead , can’t edit it for some reason,

@Lox what do you mean by daft ?

 

[paulf]

 

[Spray]

Thanks for the replies,
In op it should of read bedding in the bead , can’t edit it for some reason,

@Lox what do you mean by daft ?

Been stupid or careless

 

[Mr White]

I was told the problem was a little shading when pink grip was rendered over.

Usually when either 15mm was applied or bead where stuck on after the base cut was applied.

We saw it once on a grey render job which cured a little darker over the pink grip.

We have since changed to another brand.

 

[owls]

Yep it's not going to fail that's the issue, it's more any shading issues.
We bed beads with the odd left over bag of mono in any case.

 

[Arti]

Weber and parex say not to use it due to it causing issues with products and not correct procedures for beading in the bead but has anyone actually had a problem as such with either of these ?

No

 

[bobski]

I was told the problem was a little shading when pink grip was rendered over.

Usually when either 15mm was applied or bead where stuck on after the base cut was applied.

We saw it once on a grey render job which cured a little darker over the pink grip.

We have since changed to another brand.

Another brand of render? Or grip adhesive?

 

[theclemo]

It's fine to use. Just make sure u are 10mm over it. I was about 3mm over it b4 and u could see where I had it trough the render

 

[Rigsby]

I heard spreaders gossip amongst the grapevines that it bled pink through?

 

[bprenderingservicesltd]

It's fine to use. Just make sure u are 10mm over it. I was about 3mm over it b4 and u could see where I had it trough the render

agreed used it for years had one bleed through, seen every blob on a silicone 10mm job,winter time so maybe basecoated before set properly