Plain face render

C

craigEEE

Active Member
We have a job to do and are deciding to do s+c or a premixed render, we normally do scratched /thin coat systems and s+c but want to give this a go

Is it OCR or Kmix that we would use, also does this system go on the same as s+c (scratch and top) or just 1 coat then rub up?

Cheers
 
If u are using a machine stay away from k rend kmix. I pallet will spray ok and the next 1 won't spray at all. I had 3 blockage the other day. Tried three different r@s still no go. Got talking to pft I was the 3rd person to complain to them in two weeks. Even when I cleaned the hose out at one stage. The water was coming out the end of the hose no problem. So turnd off the water put cleaning balls in turned on the tap. And it f**k**g blocked. I've never seen that happened before. Had to get the purge hose out for a 4th time to on block it. Just would not spray it that day. I didn't buy it an other plasterer did. @krend is supposed to be phoning him back tomorrow. I told him to send it back.
 
Last edited:
I've only ever used CPI euromix and it went a dream through a ritmo. I've heard of people doing 2 passes same day but I scratch coat then top next day


Sent from my iPhone using Tapatalk
 
I do the 2 passes same day. Get in and out. Can't see the point of buying ocr if not finishing it the same day. Tbh
 
Craig ccf in Trafford park do weber OCR I personally like it 2 passes mate this weather you will be rubbing it up in no time
 

Attachments

  • Plain face render
    20170312_103213.webp
    503.5 KB · Views: 277
  • Plain face render
    20150522_135447.webp
    217.7 KB · Views: 392
You must log in or register to reply here.

Share this page

Back
Top