D
Deleted member 23452
Guest
Anyone fitted/used/plastered any of the LED lighting systems? They look pretty good and fairly straightforward to do, but I'd be interested in thoughts/opinions from anyone that's actually done some.
superspread
Well-Known Member
Like spot lights?
Topspread16
Well-Known Member
I know what you mean imago, like track lights finishing full with the plaster. Not used them yet but only a matter of time. Used the plaster in spot lights, some are way better than others. Hang down about 5mm with no adjustments on them. Have cut squares out the 1/2 board and put 3/8 in to get them to skim thickness.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
D
Deleted member 23452
Guest
As @Topspread16 said, the track type. This is one supplier https://www.theledstore.co/plaster-in-recessed-slim-led-profile-for-led
Builderboi
Well-Known Member
That looks.... Awesome!
Topspread16
Well-Known Member
I do a lot of theses for a high end kitchen company with hidden led lighting. Just upgrading their showrooms now so will be doing the track lighting before the year is out no doubt.
Sent from my iPhone using Tapatalk
superspread
Well-Known Member
Looks good
choppa
Well-Known Member
Gosh that ruff
I do a lot of theses for a high end kitchen company with hidden led lighting. Just upgrading their showrooms now so will be doing the track lighting before the year is out no doubt.
Sent from my iPhone using Tapatalk
Topspread16
Well-Known Member
Djr
Well-Known Member
D
Deleted member 23452
Guest
I've ordered these https://www.mr-resistor.co.uk/item.aspx?i=17346 as they were reasonably priced and seem decent gear. Some of the prices are crazy for the same thing.
They're going at the bottom of the slope on a vaulted bedroom ceiling. Once they're in (still a fair bit of other work to do) and @Nisus has waved his trowel about I'll post some pictures.
They're going at the bottom of the slope on a vaulted bedroom ceiling. Once they're in (still a fair bit of other work to do) and @Nisus has waved his trowel about I'll post some pictures.
Topspread16
Well-Known Member
JessThePlasterer
Queen Jess Elizabeth I
That is one immaculate radio!
I do a lot of theses for a high end kitchen company with hidden led lighting. Just upgrading their showrooms now so will be doing the track lighting before the year is out no doubt.
Sent from my iPhone using Tapatalk
D
Deleted member 23452
Guest
Nice, They look similar to the channels I got. They're all plastered in but I haven't wired them up yet. All that work nonsense keeps getting in the way.
Topspread16
Well-Known Member
That will be the joiners [emoji25] mine just sounds like a radio.
Sent from my iPhone using Tapatalk
JessThePlasterer
Queen Jess Elizabeth I
Ah that explains it !
Topspread16
Well-Known Member
Nice, They look similar to the channels I got. They're all plastered in but I haven't wired them up yet. All that work nonsense keeps getting in the way.
Them ones didn’t have enough of a lip for skim thickness. I’m convinced they was supposed to be decorative ones, but the seller said otherwise. Mate had a nightmare fitting them.
Sent from my iPhone using Tapatalk
Danny
-
That looks pucker
Topspread16
Well-Known Member
Danny
-
Nice... I miss interesting projects
Sent from my SM-N910F using Tapatalk
Topspread16
Well-Known Member
Mate had the hard part fitting them lights, teach him for buying cheapo ones. We just had abit of squaring up to do. One wall was 32mm out on the track.
Sent from my iPhone using Tapatalk