Plasterboard adhesive as filler

Samwp

New Member
I have a channel around 3000mm long and 100mm wide that needs filling. It has already been filled with bonding, so it only needs a few mm of filling. I have half a bag of Knauf Plasterboard adhesive left over, do you think this will work as a filler?

I was planning to PVA the bonding, fill with the plasterboard adhesive and then sand.
 
I have a channel around 3000mm long and 100mm wide that needs filling. It has already been filled with bonding, so it only needs a few mm of filling. I have half a bag of Knauf Plasterboard adhesive left over, do you think this will work as a filler?

I was planning to PVA the bonding, fill with the plasterboard adhesive and then sand.
Go for it!
 
I have a channel around 3000mm long and 100mm wide that needs filling. It has already been filled with bonding, so it only needs a few mm of filling. I have half a bag of Knauf Plasterboard adhesive left over, do you think this will work as a filler?

I was planning to PVA the bonding, fill with the plasterboard adhesive and then sand.


Yes





But be neat
 
I have a channel around 3000mm long and 100mm wide that needs filling. It has already been filled with bonding, so it only needs a few mm of filling. I have half a bag of Knauf Plasterboard adhesive left over, do you think this will work as a filler?

I was planning to PVA the bonding, fill with the plasterboard adhesive and then sand.
Couldn’t of been a more @John j question if it tried. @essexandy he must of text you this question at least 3 times as well.
 
He’s a right ginger chancer
Will Ferrell Agree GIF
 
Back
Top