Plasterboard props??

[Jace]

These are handy - if ya cant make timber ones :RpS_thumbup:

orrrrr 2 6 inch lenghts of roof strap as i said haha

 

[bubbles65]

I got some made up like that from a metal shop stainless steel and solid as , this was about 6 years a go my dad got them made up never new they were a actual product never seen them before

Yeah, I patented them.............5 and a half years ago :RpS_wink:

 

[bubbles65]

orrrrr 2 6 inch lenghts of roof strap as i said haha

:RpS_thumbsup:

These are handy - if ya cant make timber ones :RpS_thumbup:

 

[Jace]

mine are not timber:RpS_thumbup:

 

[Jace]

 

[bubbles65]

Oh - I see :RpS_blushing:

 

[essexandy]

I got some made up like that from a metal shop stainless steel and solid as , this was about 6 years a go my dad got them made up never new they were a actual product never seen them before

The original ones were stainless steel, I've still got a couple. Make life a lot easier.

 

[Arti]

These are handy - if ya cant make timber ones :RpS_thumbup:

they are shite. i prefer the boardmarra ones.............................:RpS_thumbup:

 

[Nisus]

they are shite. i prefer the boardmarra ones.............................:RpS_thumbup:

:RpS_laugh:

 

[beddy]

Use roof ties :RpS_thumbup:

 

[Nisus]

Here's the BoardMarra Arti :RpS_thumbsup:

 

[Nisus]

Use roof ties :RpS_thumbup:

You can screw plasterboard offcuts on the joists too you know mate, overhang an inch. I'm gonna patent it :RpS_thumbsup:

 

[SpankySouthport]

Here's the BoardMarra Arti :RpS_thumbsup:

Haha as if!! 10ft ceiling! Has he got one of them for 8,9,11,12ft also bet his lock ups full of them!!

 

[bubbles65]

Or bits of roof battens :RpS_thumbup:

 

[Nisus]

This is a good one :rolleyes)
but you might get a few armed response vehicles sitting outside when you get the board near to the ceiling :RpS_unsure:

 

[Nisus]

Or bits of roof battens :RpS_thumbup:

Wooden ones marra? :rolleyes)

 

[bubbles65]

Of course marra...........some people use bat straps too


















metal ones :RpS_biggrin:

 

[Arti]

Here's the BoardMarra Arti :RpS_thumbsup:

that's class, shame he needs another marra to help him unload it from the van, i wonder if he sends that marra home and just cracks on with his boardmarra just to prove that he can do it on his own..............:RpS_thumbup:

 

[Arti]

 

[Fatarm]

Hope he's on day rate.:-0

 

[lucius]

I quite like that.

 

[bubbles65]

Yeah that roller is useful :RpS_thumbup:

But he's going along the counter-battens instead of across them :glare:

 

[Arti]

You cant have it all marra......................:rolleyes)

 

[Nisus]

Yeah that roller is useful :RpS_thumbup:

But he's going along the counter-battens instead of across them :glare:

I've seen that in houses before marra with 3x1 counter battens & 8x3's going along them not across. :RpS_unsure:
He's saving on waste though as you can put full boards up till you get to the end then use that offcut at the other end then full boards again etc etc. :RpS_thumbup:

But by the time he's put the battens up it could've been boarded ffs :RpS_biggrin:
Oh & did he nick that roller off the back of a roofrack :-0

 

[bubbles65]

I was being pedantic last night :RpS_wink:

 

[Nisus]

<Nisus googles pedantic> :RpS_unsure:

 

[Nisus]

I was being pedantic last night :RpS_wink:

Oh ok marra :rolleyes)

 

[Olican]

Had my pair of blue telescopic for about 8 years, cracking tools