Render Systems
Private Member
Hi here is an excellent link for all venetian plaster application techniques just spent this afternoon watching a few
Link Removed
Link Removed
Polished Plaster Video's
- Thread starter Render Systems
- Start date
- Status
Render Systems
Private Member
ask Uveco on here mate he sells the stuff
warriorupnorth
Private Member
nice post steve
carraraboy
New Member
Not bad but they are mostly acrylic, I would like to see a fair few meters been done. I have worked with their products over the years, there ok but I can see the flaws in the movement, especially in their pastel range.
Whilst they do have a good acrylic range, africa, dune, swahili, they also have an excellent range of traditional, natural finishes.
I could be considered an expert on this subject.
I have had the pleasure of working closely with Firenzecolor for the last 3 years, they have over 12 years of valuable experience and the most advanced colour system available worldwide. (here also)
They introduced venetian plaster to the US.
It will take another few years but the UK is becoming increasingly aware of the benefits and uses of lime based plasters and finishes.
Lime is the original green product, these finishes pre date paints, cement and gypsum finishes.
I was a 'plasterer' for 18 years, hated it after 5 or more, then i discovered this and I have never looked back. When you realise how much more there is to this form of plastering and you understand the creative possibilities of these finishes you will be the same.
Watch all the videos, the techniques and application is not like gypsum plaster.
Most of these products can be used interior and exterior and in wetrooms.
Its the next level in plastering
I could be considered an expert on this subject.
I have had the pleasure of working closely with Firenzecolor for the last 3 years, they have over 12 years of valuable experience and the most advanced colour system available worldwide. (here also)
They introduced venetian plaster to the US.
It will take another few years but the UK is becoming increasingly aware of the benefits and uses of lime based plasters and finishes.
Lime is the original green product, these finishes pre date paints, cement and gypsum finishes.
I was a 'plasterer' for 18 years, hated it after 5 or more, then i discovered this and I have never looked back. When you realise how much more there is to this form of plastering and you understand the creative possibilities of these finishes you will be the same.
Watch all the videos, the techniques and application is not like gypsum plaster.
Most of these products can be used interior and exterior and in wetrooms.
Its the next level in plastering
Render Systems
Private Member
Hi Uveco did u manage to find a lead coloured finish for me yet?
Hi steve, im sure we have something suitable, if you want to come over and try some different finishes here you are welcome
Have a look at the concrete solutions brochure on the website.
There are A few possible products that we could tint to a lead colour.
Will need a penetrating sealer to protect from the elements and UV.
This could be tinted and applied heavy with runs like lead
It all depends on how your going to apply this one as we discussed, lead is traditionaly laid in panels with lapped joints so youll have to make it look similar
A lot depends on the
Have a look at the concrete solutions brochure on the website.
There are A few possible products that we could tint to a lead colour.
Will need a penetrating sealer to protect from the elements and UV.
This could be tinted and applied heavy with runs like lead
It all depends on how your going to apply this one as we discussed, lead is traditionaly laid in panels with lapped joints so youll have to make it look similar
A lot depends on the
Render Systems
Private Member
yes its water resistant... i wouldnt say waterproof just give it a good waxing and it will be fine, but dont have water running on it constantly
- Status